Skip to main content

Hi,

I changed the tires on this steamer and had to loosen the center crank bolt because the tire wouldn't slip under the rod attached to the tire wheel.  I thought I put it back the same way but the bolt loosened and the rods jammed going around the track.

I have been messing with it but I don't seem to be able to get it right.

1.  Are there detents in the center crank assembly so that it is clear how it aligns?  I don't feel any.

2.  Here are photos of the left and right sides as I have it assembled now.  It binds at low speed.

MTH 4-6-4 RODS LEFT SIDEMTH 4-6-4 RODS RIGHT SIDE

I have one photo of the left side only from when I bought it.

20211111_095822

Thanks for the help.

John

Attachments

Images (3)
  • MTH 4-6-4 RODS LEFT SIDE
  • MTH 4-6-4 RODS RIGHT SIDE
  • 20211111_095822
Last edited by Craftech
Original Post

Replies sorted oldest to newest

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×