Skip to main content

Closed4 replies

Type Fuse for TIU protection

M mokemikeOGR Forum Member

I'm operating layout with a Z4000 and TIU for DCS operations.  I was going to use a Radio Shack In Line Fuse holder, p/n 270-0015, designed to hold 30 amp 12/24VDC Mini blade fuse and install a 10 amp mini blade fuse.  Then the question came up of using a DC fuse for an AC application.

 

I'm using 14 ga wire throughout the layout and want to protect the TIU which has a 20 amp fuse that sure looks like a mini blade DC fuse.

At these low amp applications can I use a DC mini blade fuse for the AC system.    I did a website search for DC fuses in a AC system and each web site really wasn't helpful as it used 110VAC and 12 VDC or 24 VDC examples.

 

Thanks  Moke Mike

Original Post

Replies sorted oldest to newest

eddiemeddiemOGR Forum Member

From the Littlefuse site:

 

Can fuses with an AC voltage rating be used in a DC applications?

 

Fuses must be rated for the voltage AC or DC in which they will be used. Generally, fuses have a DC voltage rating that is half of the maximum AC voltage rating. (Example: LLSRK_ID - 600 VAC, 300VDC) Consult the factory for specific DC voltage ratings.

Views: 546
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×