Skip to main content

Hi  all,

Now that I am on the right forum please advise if there is any way to use Lionel SC1 and SC2 controllers with a dcs system? I currently have Lionel cab 1l system and I'm planning to go with also a DCS system. I currently have several Lionel twitch controllers and would like to know the best way to operate with a combined BCS system. One member suggest that I parallel wire the SC1 and SC2 controllers with a DCS accessory switch controller and use both DCS and Lionel controllers to control the switches. I would really like to use one or the other controller Iif possible to activate the switches. I am using Lionel post-war tubular switches by the way. Any help would be appreciated as usual.

Jerry 

 

 

Original Post

Replies sorted oldest to newest

Jerry,

please advise if there is any way to use Lionel SC1 and SC2 controllers with a dcs system?

No, there is not.

I currently have Lionel cab 1l system and I'm planning to go with also a DCS system. I currently have several Lionel twitch controllers and would like to know the best way to operate with a combined DCS system.

In order to operate switch tracks from the DSCS remote, you must use an MTH AIU.


DCS Book CoverThis and a whole lot more is all in “The DCS Companion 3rd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at OGR’s web store!
Last edited by Barry Broskowitz

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×