Skip to main content

5 replies

Using Lionel 022c-1 switch controllers

mwalzmwalzOGR Forum Member

Warning: I am a rookie.... bear with me.... 

I am building a O Gauge layout using Gargraves flexible track and Ross Custom switches. I love the look of all of the 1945 - 1960's Lionel switches and I have purchased a couple 022C-1 switches that are in great condition. Can they be used for switching the Ross 101 switches with the DZ1000 switch machine instead of the small button controller they sell with it? I am also wondering if there is a way to use the 022C-1 switches as a basic switch to turn a block section on and off ? If this is a silly idea, is there a Lionel switch from that same era that you can recommend using for block sections ?

Thank You everyone! Electrical is my weakness, but I am learning slowly. 

 

Original Post

Replies sorted oldest to newest

T trainman129OGR Forum Member

They should work the Ross switches. They are the same thing as two push buttons just in one housing. Note that you will have to change the light bulbs in the controller to LEDs. The incandescent bulbs will not work. LED replacements are available from web suppliers. Lionel made a switch for turning accessories on and off. It has a black plastic housing and a sliding handle. I've forgotten the Lionel part number but a web search should find some.

rrmanrrmanOGR Forum Member
trainman129 posted:

They should work the Ross switches. They are the same thing as two push buttons just in one housing. Note that you will have to change the light bulbs in the controller to LEDs. The incandescent bulbs will not work. LED replacements are available from web suppliers.

However, be aware the wiring polarity of the DZ1000 involves using LEDs that are electrically oriented differently in the circuit.  DZ1000 current flowing one way lights the red, and opposite flow lights the green.  Have verify how replacement LEDs are wired and what voltage they light up on.  Replacements should have a built in rectifier for AC operation and may/may not light correctly on the DZ1000 DC power, depending how the LED was wired in with respect to screw shell and solder tip.

Add Reply

Tags: DZ1000, 022c, Ross Custom, Block, Electrical, switch, Lionel
Views: 446
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×