Skip to main content

Replies sorted oldest to newest

Lionel’s Ten-Wheeler steam locomotives are favorites of mine, so I recently purchased a model (6-28098) of New York Central/Boston & Albany 4-6-0 #1916.

Why do I like them so much? First, they are a prototypical model of a New York Central F-2/F-12 locomotive with the classic look and perfect proportions of an early steam locomotive – “cowcatcher” pilot, high-mounted headlight, tapered boiler, unequally-spaced high 69-inch driving wheels, no trailing-truck, and long cab roof overhang. They are also the right size for my 12’-by-8’ and 10’-by-5’ layouts, and some Lionel Ten-Wheelers represent the railroads in which I’m most interested: New Haven, New York Central, Boston & Maine, and Boston & Albany. I’ve been waiting for Lionel to offer a new Legacy Boston & Albany version, but they haven’t, so when I saw this one, I bought it.

Boston & Albany #1916 was built by Alco at Schenectady in 1907 and superheated in 1919. When the B&A was leased by the New York Central Railroad in 1900, “New York Central Lines” promptly replaced “Boston & Albany” on steam locomotive tenders. This greatly offended the citizens of Massachusetts, so the NYC relented in 1907 and permitted “B.&A.” to be painted onto tenders in small letters – as seen on my model. Apparently, this was not sufficient to quiet the objections. Then, in 1912, “Boston & Albany” replaced “New York Central Lines” on tenders, and the Ten-Wheelers were renumbered with #1916 becoming #720. The new livery remained until dieselization in 1951, although #1916 was scrapped in 1932. I still would like to have a Ten-Wheeler model with “Boston & Albany” written across the tender in large bold letters but, for now, a small “B.&A.” on the tender will have to do.

Photos and videos show #1916 pulling unlettered MTH wood-sided coaches as used during the early years of the 20th century when Ten-Wheelers were main line power.

MELGAR

MELGAR_2024_0328_10_B&A_1916_10X5MELGAR_2024_0329_01_B&A_1916_10X5_DOWNTOWN

Attachments

Images (2)
  • MELGAR_2024_0328_10_B&A_1916_10X5
  • MELGAR_2024_0329_01_B&A_1916_10X5_DOWNTOWN
Videos (1)
MELGAR_2024_0403_99V_B&A_1916_10X5_CIRCUIT_29S
Last edited by MELGAR

Well, Scott, you certainly are early this week!

This week I’m back to my usual photos showing trains in action on my layout. These were actually taken by my son. This is a pair of custom painted Lionel Conrail non-powered SD 60s he found for a bargain price at a train show. It’s a long story but we had two powered chassis laying around, so he installed the powered chassis in them. Now we have two new Conrail powered units, and they are very nice looking engines:

IMG_5051IMG_5052IMG_5056IMG_5058

The last photo was taken by me. It’s a caboose, which is always at the end of the train and that is the end of my post for this week!

IMG_5083

Attachments

Images (5)
  • IMG_5051
  • IMG_5052
  • IMG_5056
  • IMG_5058
  • IMG_5083
Last edited by PRRMiddleDivision

Thanks Scott for getting us started for this weekend!   Here are my photos of the fun kind!

The "Wild Mary" as the Western Maryland Railway was nicknamed, is going strong as Consolidation 729 trundles by on the far track.  Inside the tower, the telegrapher is busy sending and receiving telegraph messages which keep the trains running safely and on time. IMG_3742

Pooby Johns and Rudy Garfield have rolled back the boxcar door only to find a full load.

IMG_2193

A Pennsy A5 switcher is at the point of a short coal drag.  IMG_2842

Attachments

Images (3)
  • IMG_3742
  • IMG_2842
  • IMG_2193

I model the PRR under wire in New Jersey 1956.  This was all the justification I needed to build a CNJ Commuter Train:

5817

The FM H-24-66 Train Master is an MTH model.  It is a bit of a Frankenstein, as it was made by combining the shell, chassis and electronics from an MTH 3 rail CNJ Train Master,  with the trucks and lower pilots from an MTH Wabash 2 rail Train Master .

Express Boxcar is from Lionel, and took all of five minutes to convert to 2 rail.  Lionel makes it very easy to take the trucks apart to replace the wheel sets without pulling out the springs

The combine and two coaches are brass models from Precision Scale.   They are models of New York Central cars, but they have the correct (non-paired) window arrangement, roof, and vestibule arrangements as the CNJ coaches.  The combine had a lousy paint job.  It needed to be stripped with a sandblaster before painting. One of the coaches was painted, but could be painted over,  The third was unpainted brass.

Here is a close up of the coach.

5818

The decals were custom made.  These cars have a lot of detail.  Here is the underside

5814

Note the wheel generators, all those tanks, and under car piping. Here is the end of one of the cars. Note the end gate, the diaphragm and striker, the hoses and the uncoupling levers, and the "jail bars" over the wahsroom window

5815

Since the cars were so detailed, I thought the rest of my build should do it justice. So I scratch built  interior walls:

5789

It mkaes a difference, compared to looking at blank interior walls

5816

The interior is fully populated with the seats painted two tone green:

5805

It hard to tell, but the floor has a subtle pattern, made by first painting with Dark Green paint, then spraying a light coat of Roof Accessory brown through a thick plastic grid

5803

And here is the Central Railroad of New Jersey commuter train pulling into a station:

5819

Attachments

Images (10)
  • 5817
  • 5818
  • 5814
  • 5815
  • 5784
  • 5789
  • 5805
  • 5803
  • 5816
  • 5819
Last edited by John Sethian

I model the PRR under wire in New Jersey 1956.  This was all the justification I needed to build a CNJ Commuter Train:

5817

The FM H-24-66 Train Master is an MTH model.  It is a bit of a Frankenstein, as it was made by combining the shell, chassis and electronics from an MTH 3 rail CNJ Train Master,  with the trucks and lower pilots from an MTH Wabash 2 rail Train Master .

Express Boxcar is from Lionel, and took all of five minutes to convert to 2 rail.  Lionel makes it very easy to take the trucks apart to replace the wheel sets without pulling out the springs

The combine and two coaches are brass models from Precision Scale.   They are models of New York Central cars, but they have the correct (non-paired) window arrangement, roof, and vestibule arrangements as the CNJ coaches.  The combine had a lousy paint job.  It needed to be stripped with a sandblaster before painting. One of the coaches was painted, but could be painted over,  The third was unpainted brass.

Here is a close up of the coach.

5818

The decals were custom made.  These cars have a lot of detail.  Here is the underside

5814

Note the wheel generators, all those tanks, and under car piping. Here is the end of one of the cars. Note the end gate, the diaphragm and striker, the hoses and the uncoupling levers, and the "jail bars" over the wahsroom window

5815

Since the cars were so detailed, I thought the rest of my build should do it justice. So I scratch built  interior walls:

5789

It mkaes a difference, compared to looking at blank interior walls

5816

The interior is fully populated with the seats painted two tone green:

5805

It hard to tell, but the floor has a subtle pattern, made by first painting with Dark Green paint, then spraying a light coat of Roof Accessory brown through a thick plastic grid

5803

And here is the Central Railroad of New Jersey commuter train pulling into a station:

5819

This is awesome!!! As a Jersey guy and someone who has read a lot about the CNJ, I love this!

I model the PRR under wire in New Jersey 1956.  This was all the justification I needed to build a CNJ Commuter Train:

5817

The FM H-24-66 Train Master is an MTH model.  It is a bit of a Frankenstein, as it was made by combining the shell, chassis and electronics from an MTH 3 rail CNJ Train Master,  with the trucks and lower pilots from an MTH Wabash 2 rail Train Master .

Express Boxcar is from Lionel, and took all of five minutes to convert to 2 rail.  Lionel makes it very easy to take the trucks apart to replace the wheel sets without pulling out the springs

The combine and two coaches are brass models from Precision Scale.   They are models of New York Central cars, but they have the correct (non-paired) window arrangement, roof, and vestibule arrangements as the CNJ coaches.  The combine had a lousy paint job.  It needed to be stripped with a sandblaster before painting. One of the coaches was painted, but could be painted over,  The third was unpainted brass.

Here is a close up of the coach.



The decals were custom made.  These cars have a lot of detail.  Here is the underside



Note the wheel generators, all those tanks, and under car piping. Here is the end of one of the cars. Note the end gate, the diaphragm and striker, the hoses and the uncoupling levers, and the "jail bars" over the wahsroom window



Since the cars were so detailed, I thought the rest of my build should do it justice. So I scratch built  interior walls

It mkaes a difference, compared to looking at blank interior wall

The interior is fully populated with the seats painted two tone green:

It hard to tell, but the floor has a subtle pattern, made by first painting with Dark Green paint, then spraying a light coat of Roof Accessory brown through a thick plastic grid

And here is the Central Railroad of New Jersey commuter train pulling into a station:

5819

Absolutely absolutely superb work John. The photos, the modeling, and your layout are fantastic!

I model the PRR under wire in New Jersey 1956.  This was all the justification I needed to build a CNJ Commuter Train:

5817

The FM H-24-66 Train Master is an MTH model.  It is a bit of a Frankenstein, as it was made by combining the shell, chassis and electronics from an MTH 3 rail CNJ Train Master,  with the trucks and lower pilots from an MTH Wabash 2 rail Train Master .

Express Boxcar is from Lionel, and took all of five minutes to convert to 2 rail.  Lionel makes it very easy to take the trucks apart to replace the wheel sets without pulling out the springs

The combine and two coaches are brass models from Precision Scale.   They are models of New York Central cars, but they have the correct (non-paired) window arrangement, roof, and vestibule arrangements as the CNJ coaches.  The combine had a lousy paint job.  It needed to be stripped with a sandblaster before painting. One of the coaches was painted, but could be painted over,  The third was unpainted brass.

Here is a close up of the coach.

5818

The decals were custom made.  These cars have a lot of detail.  Here is the underside

5814

Note the wheel generators, all those tanks, and under car piping. Here is the end of one of the cars. Note the end gate, the diaphragm and striker, the hoses and the uncoupling levers, and the "jail bars" over the wahsroom window

5815

Since the cars were so detailed, I thought the rest of my build should do it justice. So I scratch built  interior walls:

5789

It mkaes a difference, compared to looking at blank interior walls

5816

The interior is fully populated with the seats painted two tone green:

5805

It hard to tell, but the floor has a subtle pattern, made by first painting with Dark Green paint, then spraying a light coat of Roof Accessory brown through a thick plastic grid

5803

And here is the Central Railroad of New Jersey commuter train pulling into a station:

5819

Amazing work! Your layout and commuter train look incredibly realistic. 👍🏻👍🏻

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×