What did you do on your layout today?

Well I cleaned up the wiring, laid out the town expansion, painted the asphalt road extension, built the unplanned, temporary suburbia on the hill. Now that cookie break is over start wiring the town addition.

Six more days till Blissfield Railroad Days, will I make it ?

Clem        

Had 18 club members and guests over this evening visiting, running trains, and talking. They even ate all of my home make chili although they didn't drink all of my beer. Charlie will probably start a new thread with pictures. Great time.

Dan

This thread always makes me feel guilty of not doing much on my layout. I have been doing some; like line striping on my highways.

Kerigan & Kobrabob   I can understand how things are.I went tru A loss of a leg, and then a Kidney transplant,and then 3 way bypass all with in 8 months. And now they say I need to have a valve replaced in my heart And I just turned 45 a couple of week ago. So I know how things can be. All I know is that I will build this layout even if it takes me more time then other people to build.It gives me a lot of energy when I am building this.So with the weather getting nicer you will see me out in the breezeway  working on the layout.

I have 90% of the supplys needed to get going on scenery and tunnels and the mountains. All I need to do is finish the track, which is about 85% done, Then the fun part To wire this layout. And You have to remember that I have very little help and its my son and myself living hear.  So I need to get going  I have a layout to build.So I wish you guys the best and hope you recover soon Kobrabob.

Extensive scenery work in the new business district. Installed some roads as well as grass areas. I hope to finish the roads in this area today,  paint and install the curbs, and finish the grass work in the business district.

I'm playing with buildings and where mountain and streets might go; it's a start...

Ran-'em, and smoked-'em.   Now working on my mountain.

Ran some trains and carved out some foam near my harbor, going to lay some more plaster cloth in the next few days.  

In the last two days I made 72 catenary poles. Only took me about four and a half hours total. Really got a production line going. I need a lot more but that will keep me going for awhile. Now I'm working on a Korber Trolley Barn. Added a tile roof with a sway in it. Needed to raise it up a bit to clear the overhead wires and made it into a two stall barn. I still need to weather it and a few other things. Don

I finished the roads in the business district. It was very time consuming work but got this phase done before I stopped for the day.

My wife found some plaster cloth online from a veterinarian about six months ago.  When I say some, it was actually a case containing two boxes.  Weighs a ton ;-).   

You might find it for a good price at a local vet since quantity for the vet is probably cheaper for him/her and the savings on a larger order could be shared.   Same product as for people, but costs less since it is for dogs and cats, etc.

I sure wish that was true for all vet products and services!  In the past two months alone, I have spent over $2,000 on medical tests for my special girl; am buying her special food from the vet at $2 a can (only available from vets); and her meds costs about three times more than mine on a monthly basis.

I'll have to ask them about plaster cloth when I drop her off tomorrow for even more tests to be done while I'm away at York for a day or two.

Sunday I ran trains for some young visitors then started work on my Tranworx stockyard kit. Last night I did a little more assembly work and hope to finish the assembly tonight.  Then comes the paint and weathering.

Good Morning

4 Days to go !! Well the town is done the expansion turned out to be a Gravel road turned out pretty good. Started putting up the skirting around the layout, did a 100' yesterday and doing another 100' today. Still want to get my temporary industrial area done. A lot of little things to do. People, vehicles, lights, shrubs. Today was suppose to be my last day on this project

clem 

I was able to get the railing and walkway finished before the high wind hit.

here are a few photo's to view.

 $oo

  these screws have got to go!

walkway I found this planking in a 24" sheet so easy to break apart

I have to find an easier way to do the railings! 

what do you folks think? this is my first attempt

at doing anything on my own no kit this is all me

and a few pictures online to get a feel for sizing

the structure.

Don

Why do you not us it anymore?  I heard the stuff fromt he med supply stores is very messy.  

Nice job, $oo Line! Mind if I ask where you found the planking? I like the side rails, too.

I finished the curbing project in the new business district and did some work on the expanded waterway. The day was broken up by two doctors appointments so I am pleased with what I accomplished.

Bailey swallowed a wine cork and I paid $1700 for a corkectomy.

billshoff....

I found the planking at hobby bench in phoenix,az if you have a hobby shop close by that also sells airplanes and so on they should have the balsa wood and various modeling wood planking this particular one is 3" wide x 24" long  it is scribed every 1/4" so you can snap anywhere you like and trim to size if need be with a straight edge and an e-xacto knife.

click on link below what I used is really wood sheathing for a doll house hope this helps or if you have a well stocked hobby shop look for where they have the balsa wood for aircraft and various other modelers.

corkectomy!!

imagine all the train supplies you could have!

so is bailey a cork connoisseur now LOL.

http://www.micromark.com

$oo

Last night we put power to the system for the first time since re-wiring and now have voltage on the two main line tracks.

A way to go before power is restored to the yard areas and the turnout control panel.

But at least no shorts, no smoke, no sparks, and no red lights yet!

I have been working on my scratchbuilt Diesel locomotive shop the last couple days im doing roofing today eh

Scott (sp2207), I wish the best of health to you also! Sounds like you have been through alot lately. Good luck on your layout building.

SooLine , That is one REALLY NICE bridge.

Cobrabob.

I have it sealed with a red primer for now until I decide on color for the girder portion torn between black and a dark gray. here are pictures with it in place I need to make 2 new supports with a cutout so bridge will be in same spot then I can cut the tracks so it can be removed.

$oo

used the flash on camera this shot.

Work on the RR has defiantly slowed down now that winter is finally leaving!  I am not making it to the basement as often, and have a had projects half done for a very long time now.

I do need to get started on my sons train table for his birthday, 2 months away.  He will be 3 and I am building him his own train table with wooden track and wood thomas.  The other side of the table will have some O27 track on it so it can be flipped over and he can run his Lionel Thomas set on it.  

As of right now I am enjoying the 65 degree weather, mostly sunny.  Out on the back porch grilling some salmon and watching my son play in the yard!

Bil.....approx. 1 month after we adopted my dog from the Humane Society my wife left a bottle of Gorilla glue where she could get it. Not sure how many people know this but Gorilla Glue absorbs water and grows significantly in volume and mass. 2 days later and about $2800 later they removed a glob of Gorilla Glue the size of a baseball from her stomach. Needless to say with the number of surgeries I have had the dog and I share a very special bond (not Gorilla Glue either!).

Jdevleerjr, "Why do you not us it anymore?  I heard the stuff fromt he med supply stores is very messy. ".

It wasn't messy, I just have a much better way. I use Black Wrap for shape. Very little webbing or much of anything under because it's so strong. Then just use paper towels dipped in plaster and lay it on the Black Wrap. Don

What is black wrap material? Where do you get it?

Thanks

I get it from Film Tools http://search.filmtools.com/se...p;go.x=44&go.y=4  

a Hollywood company for TV and movie production. Back Wrap is like a very heavy aluminum foil but flat back. It's used in lighting and to flag off stray light when filming. I used rolls of it before I retired and had a few extra rolls when I started building my last layout. It's very strong but you can cut it easily and shape it like rocks. Just a little webbing of masking tape and it will stay in place. You can staple it to the frame of your layout. Then a little plaster on top and your done. I place rock moulds over it but you can just leave it as it is. It comes in two different widths and is cheap. You can order it from Film Tools. I'm writing a article for OGR about using it for mountains. It's great stuff. Don

I finally got up enough energy to day and ran to the pet store to pick up some supplys  for the dogs and cats. And I noticed that they carried chick Grit, so I picked up a couple of bags today. I also cut some 2" x 4"s for another table that I need to continue  my lay out. to discover that I'm out of the proper size nails . So tomorrow I need to run to Ace Hardwere to buy more nails.

Thanks Don ill check it out eh

Earlier I painted on a kitbash. Its drying. I was just now taking a break right now from my 2 track ceiling/wall shelf layout (rectangle). I have been cutting track pins & block wiring a pre war Z(not zw) to split my loop#1 into four sections-ground level(shared main with loop#2), grade #1, elevated tressels(parallel over top of a ground level branch{loop#2}), and finally grade#2. The KW has been reassigned to lighting, loop#2 on the left throttle(except for short merge with main), and two toggled sidings on the right throttle. Eventually the main will get a relay to switch between the Z and the KW automatically so I can run engines that have big power requirement differences together better. But tonight by Jove, the juice will flow again! Back to work.....

I began the lighting of 11 structures in the new business district and did some more work on the waterway. In terms of the lighting, all I have to do now is to connect the wires under the benchwork to the power source.

Darn.   Powered up the newly rewired track power and somewhere from the Z4000 to the TIU the electricity isn't going where it is supposed to go ....

Back under the layout to do the painful step-by-step tracing of the wires and current checking to see where all the volts and amps are leaking into the floor instead of going to the TIU ...

Sorry to hear that. Hope you find it quickly. That is why I like to approach my electrical like I do my blue jean cutoffs, one short leg at a time. I had better luck with the Z and KW last night, even ran a now dedicated lamp circuit for a bridge and yard light, another 2 lock-on's removed. I only had to flip the plug on one transformer to phase them. Then, one by one I set the throttles on the $35 Z , kicked back, hands free and watched as my rectifier and 10 ore hoppers climbed and descended around the ceiling smoothly, over and over and over.. ...now were are those relays I have for the main? I know they are here, I can hear them laughing at me.....pesky relays.

More track tweaking in preparation for the roadbed. Should be delivered any day now.

They should all be this easy!

I must have been "worked on it too long punch drunk" when I wired up the barrier strip for the Z4000 -> TIU circuits.

It helps when both sides are wired to the same circuit ...

Opened the boxes and examined 3 engines that Gary at Weaver returned after installing ERR and [RS in two]. Placed on the Yard rails but did not test run them, having a little health upset today. Maybe run this weekend.

Weaver Ps-4 "Tennessean" [ERR and RS].

Weaver E8 "A" unit [ERR and RS].

Weaver 0-6-0 Switcher [ ERR only,no room for RS]

Did some looking, measuring, and brainstorming for a small extension on my layout. Hope to have it done by June. I won't be able to really get started for a few more weeks but will likely swing by Home Depot soon with my list of lumber and other needed things to get started. 

I will be using my 4x4 Christmas layout. I will be putting legs on it and incorporating it into my current layout. 

Killed two command engines in one day. Not the best of days. Still managed to have a fun session. All projects on hold until I see what I drag home from York. 

Worked under the benchwork today. Connected wires to light six buildings. My wife had a procedure at the hospital that took up most of the day so time working on the layout was very limited.

Back at it today under the layout; this time it's to hook up the now-found uncoupler wires for both freight yards.

Then I'm going to finalize the track plan for the engine terminal, pack up the turnouts for now, sand down the remaining joints, vacuum up the mess, and tape off for painting with "storm cloud" grey paint.

I can see the light at the end of the tunnel!

Worked on my Diesel Locomotive shop. Got the roof all done and painted , the sides are painted and weathered too now im just waiting for some styrene pieces to come in to trim the windows and overhead doors out. Then I need to cut some .020 lexan for windows and cut some window detail out on my vinyl cutter eh 

I did nothing on the layout today, I live about 60 miles west of Chicago and we got about 6" of rain last night and it wasn't nice. Well maybe I can still get out there this afternoon,And they say Chicago  and the west burbs  have it a lot worse.

One day to go before open house. Found two more items to wire in,started cleaning and dusting. I have two engines to change out wheelsets, pickup my loaner TIU today as a spare. Sure hope everything goes well the town is expecting a large crowd. Oh well time to get back at it.

Clem

started on second deck bridge this time I used 1/4" plywood as the beam and cut 1/8" hardwood to create the I beam at bottom is so much stronger.

will start the small detail wood work friday.

am going to order some flat rail from gargraves once this bridge is done so can order enough packages to do derail feature on both deck bridges.

$oo

It has been 2 years now since I've been to York. Would like to go back, but I certainly can say I CAN live without it very happily. What I DO miss from York are the people. The trains are only second. 

Anyway, I took today as a much needed "mental health day". I started my layout expansion. Not much, just my 4x4 Christmas layout but it will expand my mainline a tad which was the overall goal. Only downside is, despite doing everything I could with what I have, getting rid of the 0-42 curves and going with 0-31. Not what I really wanted to do but it was either put up with 0-31 curves or nothing at all. I don't anticipate any major issues with the tighter curves except my more rigid wheelbase steamers won't be particularly enthusiastic about it and my 60' Passenger cars will look like crap but whattayagonnadoaboutit?

I finished wiring the lighting for eleven structures in the new business district. I separated those structures that have a  mechanical feature, a Grain Mill with water wheel and two wind mills, and put them on their own on/off switch. Pretty cool to watch.

Yesterday and today are all about shelves.  I removed 10 feet of narrow shelving and put up 27 feet of much deeper shelving for a net gain of 20 square feet of shelf space in my workshop.  Today is all about adding 43 linear feet of additional display shelves in my train room, which will give me room to display everything I have on counters now so I keep them clear, and still have room for every loco and the City of LA, etc., that I have on order now. 

Ran trains all day

 Well I made it finished putting the people and cars down 30 minutes before showtime. First day of Blissfield Railroad Days 144 visitors at my house, don't now how many at the other layouts in town. The shuttle tram worked pretty good getting people out to my place. Had an electrical glitch for the first two hours of operation, turned out to be the K- line TV camera car. Took it off and everything started working good again. Left it on a powered siding and no problem. Tomorrow another day 10:00 to 4:00. Met a lot of great people and a lot of happy kids.

Thanks for stopping by Locodan great to meet you and Donna

clem 

Ran trains and repaired a Williams GG1. 

PROGRESS FROM the mythical town of PATSBURG on the FREE STATE JUNCTION RAILWAY.

Since my last entry, I have weathered an MTH B&O Docksider, an MTH bobber B&O caboose, and a MTH Western Maryland scale test car..... all of which run on my mountain division along with a weathered ( bought this way ) Lionel flatcar with a log load.

I've also rearranged yard tracks at the west end of my layout ( The Free State Junction Railway ) 

While at the York TCA show yesterday I bought a wooden tunnel portal ( one of several purchases )  for my " new mountain to be".

Last week I aquired wire mesh from a friend.  Also purchased Fushion Fiber, Whitison Ballast ( great looking stuff!! )  from Harrison Trains at the Great Scale Model Train Show in Timonium, Md. I'll use the Whitison Ballast to ballast the tracks of my mountain division.   I also bought some tools at Harbor Freight.  Now I'm ready to begin phase two of building my mountain to the ceiling ( or just about ).  I just hope once built this mountain won't make my layout look like "Whoville" from Dr. Suess Cat in the Hat.  Well even it does, kids will probably dig it and it might lure them into the hobby :-)

Keep driving the spikes and happy railroading.

Patrick W.

Friday, I wrapped up making a new video taken on the Mid Atlantic Railway System (MARS) and then today took it easy only testing out a new static grass applicator I picked up and changing out a traction tire on a 3rd Rail locomotive.  Here is the video I titled "Rail Action on the MARS".

Here is a photo of the Bollman Bridge I purchased at York from Vernon Peachy in the fall of 2011.  The prototype  bridge is two blocks from my house in Savage, Maryland.  Although there were around a hundred of these bridges used throughout the B&O railway system this one is the only survivor.  The model came with a 5 page historical briefing of the prototype and photos.  I had been searching for a model of this bridge for almost 10 years.... I walked into the orange hall and there it was :-)!!

This bridge is the catalyst for my building a mountain to the ceiling and will take the mountain division of the Free State Junction Railway across Lake Christopher.  

Keep driving those spikes and happy railroading!

Patrick W.

Went down to Blissfield Railroad Days (Michigan) and got to meet Clem K and see his layout. Looking very nice with a very good track plan for running trains.

Dan

I feel like I'm on a chain gang. I've been making rocks all day from molds. Still have to detail them.  Don

Worked on sidewalks today. Installed eleven of them in various sizes to fit their locations. The business district is really coming along now.

Ran trains all day again Actually for the last two days the trains ran all day, thanks to my volunteer engineers, they ran I'm. I just talked to everyone that came in. 209 people toured the layout today, total of 353 for two days. What a good time we all had !! Even had a couple of human error derailments. Only one mainline engineer today, three trains on one 3 scale mile line. I was going to help but he was having to much fun, kept running trains 30 minutes after doors closed. Just one more lap! The switcher kept the industrial park with all the operating accessories going, the kids really kept him busy. The kids love the Lionel coal,lumber mill, and oil drum loader. the adults liked the MTH gas station, the musical diner phone and the Harley dealer with the custom sounds.  everyone liked the lighted vehicles, and the I SPY items scattered about. The large area's of countryside scenery was also noticed by fellow modelers. All in all a great train weekend. Now to start thinking about next winters rail projects.

Thanks to all the forum members that answered my questions and gave me ideas.

clem k   

Cut and installed the last section of plywood top. Next step, fill the joints and paint the tops...

Gilly

Jim,

Believe it or not I got to spend the whole weekend working on the layout.  Been about 5 months since I did anything besides clean up around it.  Got to building the new 12x12 benchwork in what was my workshop.  Finished 4 large benches that an elephant could sleep on, just need to cut the holes for wiring and will be able to lay track soon.  Will Give me a total of 25 x 13 of layout space.

NEWS FROM PATSBURG home of TH FREE STATE JUNCTION RAILROAD .... Today I put together and glued a Plasticville log cabin that I bought for 2 bucks at the GSMTS in Timonium, Md. a week ago.  Used my Sinbad glue I bought at York this past weekend.   Sinbad is great stuff!  I've been using it for several years now.

Also glued a pantograph on one my Williams GG1s.  Tried several location on the layout to place my house of ill- rupute ( a watered down version bought at York of Wicked Wanda's by Scale University )   I am looking at a spot on "the other side of the tracks" which may work quite well for this establishment.  The town's zoning ordinance is really strict :-)

I ran a 19 car mixed freight powered by two scale Williams GG1 ( powered an dummy ) on the lower main line...... and a 3 car train on my mountain division.  Spending lots of time running trains as a test before I continue covering track with the mountain.

Viewed a Alan Keller video of Howard Zane's layout. ( I think Vol 48 )  Great instruction on how to make a water falls.  I think I will use Howard's technique of water fall making on my mountain. Howard makes things look so simple and really gives good precise instruction on how to  build things.  I really appreciate him as a person , his talents,  and find him very inspiring!!

Keep driving those spikes and have BIG FUN with your Railroad!

Cheers

Patrick W 

Here are some photos of the Westend of Patsburg and of the Free State Junction Railway under construction

Finished that part of the renovation project that is a triangular shaped retail district. Here are a couple of photos.

I recently doubleheaded my Lionel Milwaukee Road S-3s...#265 on the point, and #267 behind the 265. My friend did a quick video on U Tube, and I am going to try and see if it is included here, if not I'll try something else, or perhaps someone out there can tell me how to post it here...or I can post the U-Tube link. By the way, the engines starting up sounded great! Out of beat exhausts until we got the engines running, just like doubleheading a real pair of locomotives!!

I see the attempt did not work, so here is the link if you'd like to take a look...http://www.youtube.com/watch?v=aF6L7JhFP7Q

Thanks for looking!

Jeff

Hello today I built the table that I need to continue on the layout, after a long day driving  a total of 146.3 miles round trip to go see a DR. for my leg. Now tomorrow I'll add the legs to the table and continue building it. and hopefully ad the top to it also. this layout is the only thing that keeps me going since I lost the leg 2.5 years ago. So don't let things bring you down and think positively  If I can do it so can you. It may take me a lot longer to build the layout but it relaxes my mind and the pain I go thru sometimes..

Today, I put together two pieces of rolling stock. I used two B&O MTH premier flat cars acquired last week in York, and added the MTH B&O RR bus on one, and the Ertel Baltimore Transit PCC car on the other.

I moved to the new refinery area of the layout and glued roadway to the benchwork. I also painted station platforms that will go with the new train station complex.

I had a limited opportunity to work on the layout today, but I wanted to get a few things done. I have a goal of finishing the renovation project within a couple of weeks so any progress at this time is a help.

I just finished a building for a friend. He's in his 70's and still mows others peoples lawns.  So he needed a office building for his lawn service. He does not know that I'm building this for him.

CBS072  That's is great that you spent the time to build this 2 story building for your friend. You did a great job on this, your friend will be happy that you built this for him

Well, so far (the afternoon is only half done - I'm taking a break while glue dries) I've added another thirty-two feet of display shelves.  I got so into shelves this past weekend, adding 41 feet, that I worked at figuring out how to squeeze another two 16-foot long train display shelves in a nicely viewable area above the shelf portion of my layout, but still low enough that I can reach them without a ladder. 

Still cleaning up after this:

The waters were finally receding at this point.

Rusty

I finally hung the backdrop today. It's 8'x2' vinyl and came with 8 clips to hang it but I lost them, so I used 3M doubled sided tape. The attic wall is sloped but it looks ok...good enough for me and my 3 year old grandson anyway.

I found the panoramic picture on Wikipedia (free license to use) and had it printed on vinyl for $17.

Wow, it's been almost a week and a half since I last went downstairs. Had a cold and just didn't feel like moving. Only spent an hour, moving things around, and planning the addition of the suspended ceiling. It needs to get done before some of the track gets laid.

Prior to getting sick, I did get some track down and painted 32' of backdrop blue, but I guess I never took any pics. I'll get some tomorrow. Patrick comes over Thursday.

Started to work on the Caterpillar dealership area. Finalized the placement of the MTH CAT Rental Building, installed a grass area for it to sit on, and un-boxed the Caterpillar equipment that will go inside the building and on the sales lot. They use more tie downs on these models than anything I have seen before. They have been in boxes for the past twelve years and have never been opened. A CAT sales/rental lot will be a very good use of them.

At York and Timonium I picked up several O scale structure kits, including one each from OGR and Korber.  I was going to just use a cellar pit as the remains of my ghost town station, but bought the OGR Flag Stop, and am kitbashing it horribly.  I found that it comes with two identical sets of walls that allow you to double the size of the building.. so that is done, and chunks have been sawed out of the "stone" to created a crumbling building, and a missing freight door opening.   One peaked end (can't think of the word) has crumbled, and windows, doors,  and roof are gone, which is good, as the kit's roof would only cover the smaller building....splintered platform, detailing, and paint will finish...signs for "Arroyo Dorado" are done, but will be somewhat

askew... trains don't stop there anymore...

I spent my layout time working on the CAT dealership. It is coming along nicely.

Started over on my garage layout. Original looked a too mishmash. I'm probably over thinking a 4x11 space.

Ballasted most of the track on my extension. Of course, I ran out of ballast about a foot before I reached the end of the track and the original mainline picks back up, which is fully ballasted and untouched. I glued everything down, will let it dry overnight, pick up some more ballast tomorrow and hopefully finish it and do a few touch ups. 

I will be making a trip up to Catoctin Mountain Trains on Saturday (www.cmtrains.com) to pick up some buildings and other things I need to work on it and keep me busy for a few more weeks. 

Chris, I use some Woodland Scenic molds but most of mine are made by a guy up in Northern Calif. The one in the picture is about three feet by two feet. I have large areas to cover so I need these large molds. I have over 100 lbs. of plaster molds done is far and a lot more to go. Don

Another busy day with Patrick. We got a section of the upper deck reinforced, so now 2 of the 3 peninsulas are completed. We also hung 57' of backdrop, which tied together two previously finished sections for a total of 122' of continuous backdrop.

These first two shots are a little before and after.




This curved section was installed today. Of the 3 tracks that go through the backdrop, the one on the right will be completely hidden. The other two will disappear under a bridge.

On the right side of the picture, the backdrop doesn't go all the way down to track level, because the scenery will go up to meet it.



A little blue paint makes a big difference.








The post will have a cement plant disguising it.



It's kind of strange not being able to see across the room anymore.














Patrick will be back on Monday. Let's see if I can get all of this painted before then.

Most of my day was spent with client work, but I did some painting of new station platforms and started the striping process of them. I also installed a switch tower adjacent to the new train station complex.

It's not the layout, but it's going on the layout..... Still working on the roundhouse. I have many, many, many hours in this thing already... sanding, priming, more sanding, spray paint, hand paint, glue, epoxy, clamp... repeat process!

 Hand paint the walls before assembly.

3 different colors of red, tan, and gray for the back.

Clamping the wall caps on after priming and painting with the spray can.

The 7 stall kit with full extension took up the whole table

Not much yesterday....just got a spintered board floor into the collapsed ghost town station, a stone foundation around it, and roof support for remaining roof up...need to add a black sheet below floor to depict a cellar....this the little OGR flagstop station, doubled in size with the included extra walls.

Not a dang thing.  The last two days were 100% focus at work, but that is necessary once in a while in order to pay the bills for the layout!

Got a lot done. Finished striping about 50 ft. of station platforms and installed them. I finished the ballasting on the elevated tracks. The refinery components arrived so I know what I will be doing tomorrow on the layout.

I finally got around to opening up the old Reading Locomotive 8004 after burning out the smoke unit a couple months back. The smoke unit is a complet loss so now I get the opportunity to upgrade it. So that's what I'll be researching this weekend.

Too bad because burning out the smoke unit creates a marvelous visual effect it just doesn't last that long.

I got up, and heard the weatherman say "sunny and 70* today ..." for the first time in months ...

Looked at the layout in the dark cool basement ... then went to the garage and looked at the Harley ... and the sunshine ....

You can guess what happened the rest of the afternoon ....