Wifi controlled variable track voltage - any way to get under 5 volts starting?

Jeff,

Just do it. The app handles TIU Tracks on variable channels exactly as does the DCS Remote.

Barry Broskowitz posted:

Jeff,

Just do it. The app handles TIU Tracks on variable channels exactly as does the DCS Remote.

Hello Barry,

My issue is when scrolling up the voltage it jumps from 0 direct to 5 volts. I want the in-between voltages like I can set on the remote but I cannot seem to find the correct setting on the wifi app?

Thanks.

Jeff,

On the track screen, tap the settings icon (gear) and then tap Edit to the right of Minimum Voltage to set a value.

Barry Broskowitz posted:

Jeff,

On the track screen, tap the settings icon (gear) and then tap Edit to the right of Minimum Voltage to set a value.

Hello Barry,

I did that and there is still a jump from 0 to 5 volts when ramping up the track power, either using the slider or using the plus and minus buttons. I could not find any other way to edit this.

Jeff,

The app always jumps to 5 volts regardless of whether you set a lower starting voltage. There is no way around this issue for the time being, unless you use the MTH app to control a Lionel Powermaster for variable voltage control, which works nicely.

GregR posted:

Jeff,

The app always jumps to 5 volts regardless of whether you set a lower starting voltage. There is no way around this issue for the time being, unless you use the MTH app to control a Lionel Powermaster for variable voltage control, which works nicely.

I thought so but I was hoping for a different answer.....here is to hoping and wishing that gets corrected soon!

Jeff,

I’m away and cannot verify one way or the other.

Barry Broskowitz posted:

Jeff,

I’m away and cannot verify one way or the other.

Hello Barry,

I understand so have a good holiday and when you can check please let me know what you find out. Thanks again!