I have 3 TIU's running in super TIU mode. I just upgraded the TIU's to version 6.0 and purchased the premium app. I am receiving an error code " no TIU's found. Make sure your iOS device is connected to the same network your wi-Fi module is on.
I am using an iPad, running the 3 wifi units in wifi mode. Previously they did work in version 5 with the standard app. It does work using the remote. What am I missing?
Replies sorted oldest to newest
running the 3 wifi units in wifi mode
There is no such mode.
Are the WIUs set to Home or MTH?
The wifi' are set to mth. Another interesting note is that "under settings , choose a network " I see 2 wifi units. I expected to only see 1since the other 2 should be slave units.
Since the WIUs are set to MTH mode, your DCS App can only talk to the one to which it's connected, not both.
What I suspect you really want is for one to be in MTH mode and act as a router, and the other 2 to be in Home mode and connect to the one in MTH mode. Correct?
Correct
I'll ck the setting on the other 2 wifi units
34DA is set in MTH mode
47BE and 34C8 are set in home mode
34DA is set in MTH mode, 47BE and 34C8 are set in home mode
Then only 34DA should be visible as a "network" connection.
I had both 47BE and 34DA in mth mode. I switched 47BE back to home mode. Now 34DA. Is the only WIFI unit that shows up as a network as expected. All my engines stay in the inactive mode. I have tried refresh and the edit triple bar method to activate them. What should I check next?
It sounds as if the issues are that you simply don't have your WIUs properly connected to WiFi the way that you think you do.
Access to this requires an OGR Forum Supporting Membership
