8754 New Haven Rectifier Repair

Hello Everyone!

A while back I picked up an 8754 New Haven Rectifier at a show that is heavily rusted. Powers up but moves very slowly. I started to take the engine apart - I can not tell how to remove the power truck from the frame. Can anyone tell me how to separate the truck from the frame? Or maybe have the service pages for the Rectifier (MPC Era)?

4/30/233:07 AM

❤️ 0

Original Post

Replies sorted oldest to newest

ÜberstationmeisterOGR Forum Member

Power truck is held on with the single screw in the hole underneath the truck (take off shell first via the end screws). Pull the motor out of the truck in the usual manner. This thread may help.

4/30/233:41 AM

❤️ 2

knights89OGR Forum Member

That was perfect! Thank you!

4/30/234:47 PM

❤️ 1

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!