I have one of the custom run UP E9 sets from Mr Muffins and noticed an audio error in the Automatic Sequence Control (ASC) dialog. The ASC is activated by holding down the Aux1 button until the horn/bell sound. Then as the trip continues, different effects play. I noticed that when the train is slowed down below about speed step 60, the dialog says "Dispatcher, I'm stopped. I'll let you know when I am rolling". That is the same dialog that plays at speed step 0. At speed step 60, the ASC usually plays something like "I'm at slow speed", but not that the train has stopped. I don't know whether it is my particular engine that has this glitch or if all the 2020 E8/E9 run does the same thing.
Original Post
