Skip to main content

Basic Idea for the old main of the B&O include the Carrollton Viaduct.  This viaduct is the 2nd oldest railroad bridge in the United States and is still in use today by CSX.  Amazing!  Google and check out information on it.  Constructed 1829.

Okay! So what is it? Well it's 47 feet long and 26 feet wide. It has a minimum aisle way width of four feet. It is technically a linear point to point configuration. Reality it's a turntable to a reverse loop run. It runs over the old main line of the United States first railroad--the Baltimore and Ohio.  Most curves are a 96 diameter.  The sharpest is 72.  There are no passing sidings or spurs yet.  This is a basic outline.Dlayoutidea

In reality this line features the 2nd oldest railroad bridge--the Carrollton Viaduct--still in use today by CSX. This bridge was built in 1829! I would say that it was constructed very well indeed!

The model will run from RELAY Maryland to the Point of Rocks Maryland. That is if the person I drew this up for decides to go with it.

He informed me that he wanted a realistic run like the Glacier Line.

 

Attachments

Images (1)
  • Dlayoutidea: B&O Old Main over Carrollton Viaduct
Original Post

Replies sorted oldest to newest

Where on the plan is the viaduct located?  How would the owner access the room?  There is a door in the upper left, is a duck under the option considered?  Is this going to be an operational oriented layout, ie local switching?  If not and it were me I would want another return loop in the upper right or a pass through the storage area with a second return loop either below or above the return loop in the lower right.  Or just a link to that loop to save space that permits continuous running.  Great use of space however, I like it.

Location of viaduct will be along 1 of the 2 center bubbles--yet to be determined.  A work-in-progress.

Access is easy!  The photo is terrible.  There is a stairway into the basement at the right edge of the picture just above the storage room.  You simple walk into the layout area.  No obstacles!  There are no duck-unders!  The door leads to the outside.  There will be a hinged section across the doorway for access/egress when layout is not in use.

Layout will be for operations.  This is the first basic sketch as the owner requested 96 diameter curves and I added the four foot minimum aisle ways to ensure people may easily pass one another as they follow their trains.  There will be switching areas and also spurs along the route.  There will be at least two passing sidings.

There will be a provision for a continuous run made--it was not added as to not "confuse" the drawing.  On a CAD program I am able to turn on or off layers.  For a photo, you have to pick something.  I posted the very basic route.  In the old days this would have been called an out and back.

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×