Skip to main content

Have visited and photographed the replica engines used at the Last Spike display at Promontory Summit, Utah

 

Was considering modeling them.

 

Perhaps I will have to paint up my own set. I have 4 of the Lionel General engines they run well and 2 are available for a repaint project but they are not quite to scale. These might be the best option for engines if I want to run extensively for shows.

 

I also have a couple of the Rivarossi Genoa models 1 in kit form 1 that runs.

And noted another at a shop locally for a reasonable price. I think the Genoa engines would work well for the Central Pacific Jupiter model.

But perhaps the Reno kit would be better for building the Union Pacific 119 engine??

 

Anyone seen a Reno kit around they are rare?

 

They do not need to run for display more then anything?

 

 

IMG_8267

IMG_8268

IMG_8269

IMG_8270

IMG_8271

IMG_8272

IMG_8273

IMG_8274

IMG_8275

IMG_8276

Attachments

Images (10)
  • IMG_8267
  • IMG_8268
  • IMG_8269
  • IMG_8270
  • IMG_8271
  • IMG_8272
  • IMG_8273
  • IMG_8274
  • IMG_8275
  • IMG_8276
Last edited by kj356
Original Post

Replies sorted oldest to newest

The only substantial difference between Rivarrossi's Genoa and Reno (in both O and HO) was the Genoa has the balloon stack, oil headlight and wood load, where as the Reno has a straight stack, electric headlight, air compressor and oil bunker.  Otherwise the loco models are identical.

 

If you fabricate a straight stack for a Genoa kit, you'd be in "close enough-land" for the 119.

 

Rusty

Last edited by Rusty Traque
Originally Posted by Simon Winter:

Last Spike???? Always heard it called: The Golden Spike! Can't help you much, but I am fairly sure someone (PSC maybe) did the set in brass. Bad news is, I think they were around 6 grand!

 

Simon

PSC did the pair - they run ~$3500-4000.  You see a set for sale about once a year....

As evidenced in the photos, when you have a nice spindly Rivarossi Genoa or Reno sitting in front of you, most of the period steamer offerings from MTH and Lionel look disappointing even at 3 feet (to me anyway), especially the solid look of the boiler and firebox areas.

I scan for the Rivarossi stuff on the Bay once in a while, and the Genoa seems to come up more than the Reno.

A re-motor and a Marx shoe underneath? I dunno. The wheel flanges on 3-rail switches would be a challenge, and a lot of playing with weight would be in order. Just my lowly $0.02

Tks for input.

I was able to get the Reno from a local vintage toy shop to add to the others in my photos above. Took the track and transformer down and tested it and it runs so picked it up for a good deal.

 

I think the Genoa and Reno will work fine for my pair of engines. They both run and will rarely get run much, not the strongest or most reliable motor and gears.

Will just take a little work to do some repainting and a few modifications, will not try to be exact but reasonably close.

 

But I thought perhaps if I get ambitious I might also do up a pair of the Lionel Generals in 3 rail to run at kids model train shows they will run for hours though not at all to scale close enough for the kids.

 

Yes it is known as the Golden Spike National Historic Site, worth a visit if ever in the area nice collection of artifacts and info and fun seeing the trains run.

http://www.nps.gov/gosp/index.htm

Last edited by kj356

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×