DCS COUPLER SLACK SOUNDS

Freight Train JimOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Does anyone know how to raise the volume of the engine coupler slack sounds using DCS?

I have one never diesel engine with very low volume coupler slack sounds - this also applies to the air release sounds as the engine starts out.

A little help would be appreciated a lot. Thanks in advance.

Jim S. (Freightrain)

11/26/138:11 PM

❤️ 0

Original Post

Barry BroskowitzOGR Forum Member MEMORIALIZED MEMBER

Jim,

Get the engine into the DCS Remote's LCD window. then, press:

Menu/Sound/Accent Sounds and use the thumbwheel to adjust the sound/level.

Lastly, press the thumbwheel and then the ENG key.

This and a whole lot more is all in "The DCS O Gauge Companion 2nd Edition", now available for purchase as an eBook or a printed book from MTH's web store site! Click on the link below to go to MTH's web page for the book!

http://www.mthtrains.com/content/60-1279

11/26/1311:24 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!