Skip to main content

Replies sorted oldest to newest

Lionel made the original 12062 and then updated that same accessory but kept the same SKU.  The originals were Series 1 and the latter Series 2.  Underneath the Series 2 has one screw in each corner of the gearbox covers.  I have a Series 1 and experienced no issues after several years of service.  The gear inside the gate on series 1 strips if the arm is restrained when actuated or forced up or down by hand.   Parts for them are hard to come by.

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×