I just put in my new DCS system and I have 4 lines. I'm going to all PS2 or PS3 engines I currently have 2 PS3. How do I change the 2 variable input out to fixed. I was amazed after running my PS3 engines on the new DCS system and I want all my engines to run this way.
Gary
Replies sorted oldest to newest
Gary,
Menu/System/DCS Setup, and select a variable channel and press soft key FXD until a message appears Variable channel in Fixed Mode.
 | This and a whole lot more about DCS is all in MTH’s “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store! |
Thank you
842,
You really need to consider the purchase of Barry's DCS O Gauge Companion Book, and the WiFi addition also, now that you have the DCS. All the info you need to set up and build a DCS/Legacy layout, is in his seriously well written DCS books. The books will save you a lot of time and trouble with your DCS learning curve.
PCRR/Dave
Access to this requires an OGR Forum Supporting Membership
