Skip to main content

33 replies

Legacy 1.6 Base and 1.72 Upgrades at April 2023 York? Any interest.

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

Is there any interest in getting either modules you provide created or Bases and Cab2s updated at York?  I did this last fall and am willing to do so again if there is interest.  If there isn't a demand then I won't be bringing the extra "gak" I need to do this.

The Legacy Users Group (me) is offering to make modules or just upgrade equipment again at York depending on interest.



I can setup in the Orange Hall Lobby right of the main entrance just beyond the FasTrack group.  Last time I blocked an hour on Thursday afternoon and Friday.  If I do it this time it will only be a half hour window though. Thursday at 3:30pm-4pm and Friday at 11:30AM-12 noon.



I can have everything I need to create and test the base and or Cab2 modules (you will have to supply 2 writable modules or 1 if you just need the Cab2 update).   I will have my PC and a 990 system to make and test before you leave.  Here is GRJ's Make a Writable Module thread.

I can also have a Base and Cab2 module for those who want to bring their 990s.  Please bring batteries with your remote.  I'll supply a power supply for the base.   From my end, I only ask to try to get there 5-10 minutes before the end time so I can get you in the que.  If you know anyone on other forums that needs an upgrade point them to this post.  All are welcome.

I think I remember  @gunrunnerjohn  mentioning that he will be at Henning's booth with modules as well to do upgrades.  He can correct me if I am wrong.

If for some reason these times don't work for you we'll figure something out.

Depending on the interest I will update this thread to reflect whether we will do this or not.

Last edited by MartyE
Original Post

Replies sorted oldest to newest

B BlamesmokeOGR Forum Member

Morning, I was pointed in your direction for some help. My base and remote are currently still on version 1.2. I can not come to York but I'm trying to see how else I can get this updated to at least version 1.3 so I can perform the updates from that point forward. Weather that's mailing someone my black module or what I need to do. I am new to this needing to update stuff so let me know if I'm on the wrong path here. Thank you!

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER
@Blamesmoke posted:

Morning, I was pointed in your direction for some help. My base and remote are currently still on version 1.2. I can not come to York but I'm trying to see how else I can get this updated to at least version 1.3 so I can perform the updates from that point forward. Weather that's mailing someone my black module or what I need to do. I am new to this needing to update stuff so let me know if I'm on the wrong path here. Thank you!

If you have modules I can certainly create them for you.  My email is in my profile.  Just get them to me.  I'd just get you all the way up to Base 1.6 and Cab 1.72 unless you'd really prefer to start at 1.3.

TedWTedWOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I will offer my help to upgrade blue modules to "writable black" modules.  I won't be attending York, so for those of you who also won't be attending, here's a way to get your upgrade.  If you send your blue modules to me in a pre-paid padded envelope with a return prepaid label, I'll convert them, load the latest base and remote upgrade(base 1.6 remote 1.72) and send them back to you.  No charge.  Email is in my profile.

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

OK so there is very little interest expressed here but I will still bring my "gack" to do upgrades.  If you intend on getting modules made please make sure you have 2 modules if you need both the base and cab code.  I will be in the orange hall lobby past the FasTrack group that sets up between them and the meeting rooms.

Thursday at 3:30 PM until 4ish depending on the amount of people and Friday at noon until 12:30.  I will have my modules to do system updates if you bring your Legacy System and my PC to create modules that you supply if you want modules made.  I will test them before you leave on my system.

I would still like an approximate head count so if you don't mind responding to this thread if you intend on using this service but at minimal try to be there earlier than later.  If you know anyone on the other forums that would like this done by all means relay the information. 

Also GRJ will be at Hennings with his modules as well.  He will not be making modules but can upgrade your system if you bring it.

Last edited by MartyE
MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER
@BlueComet400 posted:

I won't be there, but if I were, I'd get in line for sure. Thank you, Marty and John, for doing this.

John

I can either send you my modules for you to get upgraded or you can send me a couple and I'll program and test them and send them back if you'd like.  My email is in my profile. The only cost is mail one way.

Last edited by MartyE
Next

Add Reply

Views: 1,174
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×