Lionel MiJack repair

20180710_130456

As you can see the drive shaft connected to the gearing that provides up/down motion spins loose so the plastic gear doesn't move. Any suggestions on repairing it here at home would be appreciated,  I really don't want to take it apart since the connecting thread is involved.

thx

           OPKKS RR

The Transcontinental RR 

     "Tryin ta git it rite"

part of the D Reg U Latd Co

Attachments

Photos (1)
Videos (1)
20180710_130341
Original Post

Lionel used to have the gears. They are nylon, shrink with time and crack. I drilled a hole in the gear all the way through and used a piece of music wire to keep it from spinning but it would catch on every revolution where the teeth had spread apart. No glue will hold nylon together. Best replace the gear. BTW its not as complicated as the TMCC wrecker crane. Not a big deal to reinstall the thread.

Pete

John, I had gotten in touch with the Train Tender before the spring York meet and he said he would not be at the Sping meet but would be at the Fall meet. My MI Jack needs repair (I think I might have mentioned it to you one time at Hennings). Get a couple of gears and I will have you fix mine.

 

Redball342

Lionelzwl2012 posted:

guys I would like  metal gears as well. does jeff have a websight? I am unable to go to york anytime soon thanks. 

btw if we install all metal gears in the intermodal crane can it then lift up heavier containers from other manufacturers?

You also have to deal with the Thread/string for a cable. That too can easily fail under a heavy load!

member:Golden Spike Club Charter Member

Add Reply

Likes (1)
NSBill


OGR Publishing, Inc. PO Box 218, Hilliard, OH 43026 330-757-3020
www.ogaugerr.com
×
×
×
×
×