Skip to main content

Closed1 reply

Lionel NS Heritage ES44 Minimum Curve

NJOGaugeNJOGaugeOGR Forum Member

The catalog shows minimum curve of 054 but i have questions:

 

1. Previous Lionel ES44's had minimum of 042 listed but 054 recommended.  The hybrids from a few years ago show 054 as minimum.  Why the differences?  Has anyone attempted to run one on 042?

2. The ES44's are 19" long.  The scale SD80's are 19.5" and require 036.  The DD35's are 22" and show 042 minimum but 054 recommended.  Is there something with the ES44's that make them require larger radius?  Something with the pilot?

 

I really want the Conrail ES44 but my outer loop is half 042 and half 054.

 

joe

Original Post
M MikadoOGR Forum Member DIGITAL SUBSCRIBERFORUM SPONSOR

NJOGauge,

We recommend O54 due to the pilot on the ES44. The pilot "look" like they are fixed,, but actually pivot with a return spring that centers the pilot. The coupler itself pivots too. When running an ES44AC around O42 the coupler is stretched to its limits and will derail a car without a pivoting coupler, such as a 9950 die cast sprung truck. O54 curves relaxes these limitations, hence we "recommend" O54 curves, but the loco will actually ride around a O42 curve. That is what the catalog is trying to convey, with a lot less words.

 

Thanks,

Mike

Lionel

Views: 689
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×