Skip to main content

Closed13 replies

Mogul Efficiency:

FM Former Member

 

Hello,

 

With my new brass Mogul coupled to its consist, it requires just 3.5 volts on the track to get the train moving, but my GP-60 needs 7 volts to move out.

 

This reminds me of the complaints from the old Steam hoggers when they had to transition to Diesel:

 

"You have to wait 'till the Diesel builds up the RPM to get enough drawbar pull to get moving, but with the Steamers, I just shoved the Johnson Bar forward, yanked out the Throttle, and the power was at the drivers rat now, no waiting!"

 

Yep, with 250-300 PSI in the boiler, operating through the full piston stroke, you could spin the drivers with no trouble! 

 

Bad Order Hal, who grew up during the last 15 years of Steam.

 

 

 

 

 

Last edited by Former Member
Original Post

Replies sorted oldest to newest

FM Former Member

 

 

Sure, Engineer Joe...I realized that.

 

I was just referring to the response after the command, which is quicker with Steam in the world of the Prototype.

 

This doesn't mean I'm gonna throw rocks at my Diesel, because after all...it has SOUND!

 

When my Mogul is fitted with a decoder, it won't be a dragster either, BUT it'll have that Whistle, that Bell, and that Chuff that I want to hear.

 

And yes, my GP-60 IS a Gold!

 

Bad Order Hal

Last edited by Former Member
Views: 1,200
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×