MTH's Mels Dinner

Chatter is not right. If it is like the Fire station there is a large driven segment the vehicle pin fits in which the motor gear rotates forward and then back via limit switches. You may have to disassemble the diner bottom unless someone chimes in with another idea.

. There must be 5o screws in the bottom.  Was hesitant about taking them out.  Afraid I might take the wrong one out and things would fly everywhere. Have the three parts of the building off but haven't  opened up the bottom.  hoping to here from someone that has done it.

Yes there are a lot of screws in this thing but, you can remove them - nothing will fly out.  There are 2 motors; one moves the car and the other moves the waitresses through a rack and pinion setup.  There are limit switches at the end of each rack to stop and reverse the action.  I'd guess that either the car or the waitresses are out of position.

Take pictures so you can get it back together.  Good luck. 

Dan

Steve, when you take it apart the bottom will lift off - all of the guides are on the top part.  Without distributing it, check the racks to see if that's where the problem is.  Also, there are 2 sizes of screws; the longer ones hold the building pieces on (although it sound like you have them off at ready).

Dan

Add Reply



OGR Publishing, Inc.
33 Sheridan Road, Poland, OH 44514
330-757-3020

www.ogaugerr.com
×
×
×
×
×