Hello Everyone I searched this topic first and went through the Lionel parts list also before posting this. I ran my 6-18056 Hudson w/ Vandy tender after having not done so in months. I run it on TMCC with a cab1. I am not getting the chuff sounds when under way.
I get start-up sounds, whistle and bell, coupler everything but chuff while underway. I checked the railsounds switch in the tender and all was good.
I did not see a part on the Lionel listing for a chuff switch, cherry switch or anything that looked remotely related. I also did the engine reset with the run/ program switch and code 740 but it did not bring it back.
My question is...is the chuff generated by switch/cam/ action, or purely a product of the railsounds board. Where should I be looking?
Thanks for any help you can give on this,
John
