Skip to main content

 

So my wife and I decided to restore our barn from 1850 including a new concrete floor, lighting, electricity, windows and heating system and of course the upstairs was completely renovated and this was the outcome. I'm so glad to finally have a room to set up and run/display my trains, it's been too long to say the least. I've already started thinking about the bench work and track plan so stay tuned

Enjoy your Sunday and Happy Easter

John

Original Post

Replies sorted oldest to newest

flanger posted:

I agree with everyone...that's a well executed project for sure. I also agree with the comment regarding a backdrop...think real careful before you consider covering any of those beautiful walls. How far in those beveled ceilings is the standup height reached?

Bob

paul 2 posted:

That is one nice looking train room. Can't wait to see the pics of the layout coming together. What are the measurements of the room???....................Paul

Hey Bob and Paul-

The larger room measures 14' wide by 25 ' long and of course that's not including the smaller room when you first walk into the train room The ceiling seems to pose the biggest issue as far as designing the table. Height wise, the table would be a little over 40" tall give or take and 15" away from the wall. To give room for the trains so there not stacking up against the ceiling and also I'm not smashing my head constantly on it either when I go to reach for something. 

 

John-

Pine Creek Railroad posted:

Munster518,

   John your new train room looks great, can't wait to see what the layout will be like, make sure to post many pictures as you build!  

On a different note, do you own Munsterlander dogs?

PCRR/Dave

Thanks Dave, and no I do not owner Munsterlander dogs. I'm guessing these are German Shepards? Either way, cool name to say the least.

John-

Nicely done.  Beautiful environment for a layout.

If the sidewall height is an issue... I recently saw an article (in a British magazine, I think) where a fellow had a similar configuration.  He built the layout lower than normal, and used a rolling office chair when operating - sitting in the chair put him at the right height relative to the layout.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×