Sound file for 30-2189-1 Correction- 30-2198-1

Or any 5 volt sound file for a Railking  subway or elevated engine should work, matters not if it's Chicago or New York.

hi here is the sound file listed from MTH web sight you wanted!

https://mthtrains.com/30-2189-1

here is the web sight it came from!

Alan

Thanks Alan! By the way your friend did call me!

So sorry guys and Alan, I meant 30-2098-1.

You probably mean this one:

https://mthtrains.com/30-2198-1

Yes, Joe that's it. However there is no sound file found on that site, unless I'm just a serious DA! and don't answer that! LOL!

Marty,

I just E-mailed the file to you. Regardless, the file is on the web site, under the Support tab.

 Enjoy!

Thanks Barry, the next time I'm in your area, the beverages are on me! I'm not even going to worry about trying to figure out why you can get the file and I can't. I probably won't need to seek another as I make copies of all my sound files. this is for a friend that bought this set "as is" I warned him about buying it, and I know the problems with the older 5 volt boards, I do however have an extra 5 volt board that has the smoke feature blown from the board. Perfect for a subway unit!

Marty W. posted:

.........., I do however have an extra 5 volt board that has the smoke feature blown from the board. Perfect for a subway unit!

Barry or others can correct me if I am wrong, but I think quite a while ago it was discussed that the subways actually had a different board (or maybe just different firmware?) to deal with "Auto Mode". 

Not sure a generic PS2 board will do Auto Mode even if the subway sound file is loaded.

-Dave

Not sure a generic PS2 board will do Auto Mode even if the subway sound file is loaded.

You are correct -  it requires a PS2 board with the extra firmware for the subway transit announcements. A standard PS2 board will load the file, however, the subway menu will not work.

That is 5V only.  3V has the code generically and so does PS-32.  G