I will start off with a couple of harbor cranes I had constructed in the past. Let's see what you have been working on.
Replies sorted oldest to newest
Wow Alan, those are great. They huge too. That must of been one heck of a layout to fit those on. I’m confused on why the shipping containers are on the top beam? Don’t they have control rooms up there?
Here is what I worked on Friday night. Some cone tanks to install under the Hooker Chemical plant building. These are going to be 3D printed today.
These are 2.75" tall. 3hrs & 11 min. to print .
Here is the tank by itself
Alan, masterful job!
Al,
Your cone bottom tank looks great. There are container like structures on the tops of the ones I see in Port Newark, so that is what I used on top.
NOT MY WORK.......a local modeler made this replica of the Ashland VA Amtrak Station......it’s on our 12x15 layout......
Again I say: NOT MY WORK.
Peter
Attachments
Alan, that work is amazing. looks so real. CSX Al nice tank work, great detail.
-Tom
Beautiful work by all
Finishing up on replicas of the Suncoast 200 Ton Coal Tower. One is a customized kit bash while the other is scratched built. I will post a separate thread once I have completed the structures. From what I understand this kit is not offered anymore???????????
I just found a major issue with the kit - If it is placed over track on top of roadbed at 5 inches it is not high enough to allow Steamers to pass through! I am going to have to cut off the bottom and somehow make the legs longer - ~ 6 inches or more. My guess is that it was not designed to sit over track but to have track pass on both sides?????????????
Hopefully came up with a good looking solution. The original problem is shown below. The smoke stack misses by about 1/4 inch
The redesign is next to the kit design. I think it looks cleaner.
The locomotive now has no issues passing underneath
I am going to need to build a suitable base for the elevator now.
Attachments
I finished my beverage distributor. This is a Downtown Deco Rainbow beverages kit that I updated. I made the rollup doors from evergreen and shortened Korber door rolls. The Bud sign is an N scale Miller billboard.
Attachments
Attachments
Nice work this week guys. I like your tanks Al.
here is a theater I have been working on. Some more detains to go but mostly done.
Attachments
Nice work Rich.
Andy
Lots of good Sunday stuff! I like the Art Deco theater facade. It looks terrific. Everything else looks terrific too!
Forty Rod posted:
It is in the lobby, but I used opaque vs clear glass for the door so you don’t see in side.
Thanks to all for sharing the great work!
Great showcase this week, everyone did amazing work. Appreciate all the pictures.
-Tom