Skip to main content

Replies sorted oldest to newest

I would just check with a meter volt ohm meter or a light and you can tell when you connect to 2 terminals and the light is bright but when you are on the other terminal the light will change intensity as you adjust the know on the AF transformer if I remember right I believe the base one is the common one you use for both outputs ok

Alan 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×