Skip to main content

2 replies

Using Commander EX for Dummy Engine...?

cjackcjackOGR Forum Member DIGITAL SUBSCRIBER

I’m a bit confused on the directions. The instructions say to use the HC output (800 ma continuous) for smoke, but the config codes only suggest the LC output (400 ma continuous) for smoke. Also, if I use the HC, then what smoke resistor is recommended? Is the HC output at track voltage (18 vac)? Or is it less (how much less) and boost is functional giving track voltage (18 vac)?

I could also use a Cruise Commander (without the motor hookup), and is it the same issue, output current only 800 ma? Or is it more than a Commander EX?

Original Post

Replies sorted oldest to newest

gunrunnerjohngunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

The little TO92 triac will not survive running a smoke unit for long, so I'd insure you're running on the HC output for the smoke unit.

The Cruise Commander has a 4A rated triac for smoke, it's the triac on the R4LC.  Without a heatsink, around 800ma is about the right continuous rating for it.  I believe the HC output of the Mini-Commander uses the same 4A triac.

Given they're in short supply, I wouldn't waste the Cruise Commander on a dummy locomotive.  You can do a dummy very well with an R4LC and one of the little steam motherboards.  That will give you all the functionality.  If you wait for the Lionel 1/2 price parts sale (assuming they haven't cancelled that as well), the total cost will be in the $30 range.

Last edited by gunrunnerjohn

Add Reply

Views: 191
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×