Are these as terrible as what they seem to be. Mine need to be fixed and I could use some help. I have a RH and a LH, they work partially, sometimes.
Any advice is appreciated on repair and maybe better yet on what type of reliable switch you would use.
- Richard
Replies sorted oldest to newest
The 5132/5133 are newer versions of the O22 and are identical in design. Plenty of good information on adjustment and repair of these switches can be found at this LINK. Be sure to read the entire thread.
Some folks have reported burning up some internal wiring on the 5132/33s, however I have had a total of eight of those switches I reconditioned for about ten years and they all work properly. I run them on fourteen volts through the fixed voltage plugs and the wiring has held up.
Pete
Beautiful Pete! Thank-you! So much information. Is what I need pretty much contained in the second post by servoguy? Any main identifiable tips?
Access to this requires an OGR Forum Supporting Membership
