I have a couple of pieces of rolling stock that require the press of AUX 3 to enable the sound. I have both the TMCC manual and the Legacy manual that list all of the codes that can be sent and no where is there an AUX 3 listed. I need to know the exact data structure for AUX 3 so I can code it into JMRI and be able to activate those functions. Does anyone know where I can find the data structure for AUX 3.
Replies sorted oldest to newest
That's a really good question, I don't see anything either, it obviously got added since the documentation was produced.
Have you considered hanging a 'scope on it and decoding it that way?
I’m not sure about rolling stock but on a VL GG1 it cycles through the arcing pantograph operations from arcing light and sound, to just arcing light , to all off.
@MartyE posted:I’m not sure about rolling stock but on a VL GG1 it cycles through the arcing pantograph operations from arcing light and sound, to just arcing light , to all off.
Marty, I think he's looking for the actual encoding in the serial data so he can incorporate it into his applicaton.
Access to this requires an OGR Forum Supporting Membership
