Skip to main content

Replies sorted oldest to newest

If this is a PS-2 3V board and it is not the speaker, or bad volume pot in conventional.  Do a factory reset.  If still not improved it can be a Power Supply board failure, or a Processor failure.  You need to be careful, if it is the power supply it can be a fault that causes a hard failure.  If not the speaker, you need to let a tech have the boards for testing.  I can do it, if no one local.  E-mail in profile.  G

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×