Skip to main content

I used foam core for the street surface in my first module (see photo), and it has held up well. The foam core in the San Juan module is well supported by the station ceiling beams (which also contain the LED's for the station). And I hope to build all the city buildings from foam core as well to keep things as light as possible.

20231110_131040

Attachments

Images (1)
  • 20231110_131040

The small turrets ("garitas") found along the ancient walls of Viejo San Juan are iconic and so I want to include one at each end of the streetscape. I suppose some day there will be 3D printed versions, but for now I am making do by drilling and grinding out the insides, a door and windows of Chinese-made souvenirs that just happen to be the right scale! Milliput is fixing the accidents that happen. A face mask and a vacuum cleaner nozzle near by are a necessity because of the clouds and piles of dust made up of who-knows-what that are emerging from the insides of these souvenirs as I grind, cut and drill.

20231203_18162120231203_18172720231203_18402620231203_183358

Attachments

Images (4)
  • 20231203_181621
  • 20231203_181727
  • 20231203_184026
  • 20231203_183358
Last edited by West Side Joe

Two X-Acto (or Excel) knives and blades. First I traced the opening with a pencil. Then I used a straightedge and a #1 knife with a new #11 blade to pierce the board along the traced line in closely-spaced intervals, making sure there's space under the board for the knife point to go all the way through. Finally I used the straightedge with a #2 knife and a new  #18 chisel blade to cleanly push through the piercings in the board.

Last edited by West Side Joe

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×