Can someone who has opened up the dummy coach of the MTH Railking 30-20031-1 RDC Budd Car Set tell me which screws I need to remove to separate the body from the chassis? I removed the 4 long, outside screws at each of the four corners of the chassis but cannot remove the shell. There are 5 other shorter screws that I don't want to remove if I don't have to. I assume some of them attach the interior to the chassis.
Any help will be appreciated.
email in profile.
Thanks.
Replies sorted oldest to newest
I don't have one of those, but I can tell you what I do with mystery screws.
I loosen them just a couple of turns and then wiggle the frame in the shell and see if those are securing the body to the frame. If so, then I take them out. If not, I tighten them back up.
http://www.mthtrains.com/sites...ction/30dl16669i.pdf
Use the link to the operator's manual, and go to Pages 32 & 33 to see the screw locations for body removal. The link will take you to the MTH website.
Access to this requires an OGR Forum Supporting Membership
