When I run a Legacy locomotive with my iCab and set it to Legacy steam mode it always goes back to TMCC mode when I start running it. Am I doing something wrong or why is this happen?
The iCab app will read the Legacy base record to set the type of operation. If you manually change the mode, the iCab app will change it back after checking in with the Legacy base. The manual selection is designed to be used with the Base1-L, where there is no database to query.
Set the correct mode from a Cab-2 and then iCab will observe the setting.
The cab-1l doesn't support modes like the 990 does, nor does it save settings in the base, It's basically a TMCC controller with a couple added features
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!