I have a PW Lionel AC motor, perhaps for the 397 Coal Loader, but I have not been able to positively identify. Any information from fellow members is greatly appreciated. Brush plate is style #364M-24, possible a 397M-1 motor? Turning open armature by hand produced a 1/4 turn of output shaft from gearbox with 130 turns of the armature. That relates to gear ratio of 520:1...? Opinions...….
Jesse TCA 12-68275
Replies sorted oldest to newest
It is from a early 364 log loader.
364 log loader....
Thank you, Chuck and Train Nut, for the info and quick replies. With all the books and maintenance publications I have, could not locate any definite identification. A lot of schematics, but not enough for positive id. I have two of the 364 log loaders, several of the 397 coal loaders. Have been considering making use of this for my "under construction" 34" turntable I am building ( progressed good today with acquisition of a 17" lazy susan).
Again, thanks , gentlemen
Jesse TCA
Access to this requires an OGR Forum Supporting Membership
