Sorry, I don't have the product number with me at the moment but it does have cylinder steam effect. I believe it's the latest version. Anyway, I can't seem to get the cylinder steam effect to work. Running a Cab2 and using the 2nd button down from the far right of the keypad. Has plenty of fluid and the Aux smoke button is turned on.
Any help would be appreciated.
Thank you.
Replies sorted oldest to newest
Wrong button on the CAB2???? You pressed blowdown steam- (normally on most engines) if it had it that ejects below the cab and firebox area.
Edit, for some reason I had the wrong J in my head. It is 1 AM trying to answer this.
2019 example PRR J1a http://www.lionel.com/products...acy-j1a-6174-1931420
PRR J1a manual https://www.lionelsupport.com/...710250LEGACY2104.pdf
page 16
So on the way earlier series, they might have used the blowdown key for manual activation of cylinder cock steam on that series 6-11300. Seen in this video again, the much earlier model https://youtu.be/cpaJzoMoE8Q?s...vXMOcNezA4&t=838
Looks like someone asked this before https://ogrforum.ogaugerr.com/...ot-about-the-whistle
So at least I wasn't crazy thinking it might be AUX3
@MartyE posted:AUX 3 if I am not mistaken.
Sadly, no final answer.
I was just reviewing the manual for my S3 which has cylinder steam and does use Aux3. It also can be programmed to use #6 normally blowdown . https://www.lionelsupport.com/...84064250LegacyS3.pdf
I have no idea if any of that works with your loco.
Thank you. Very helpful.
Definitely AUX3!
Thank you!
Access to this requires an OGR Forum Supporting Membership
