Skip to main content

I’ve read about the ‘solder center rail to frog’ fix for when the red wire land pattern on the PCB burns up.  I tried this fix instead using a Dremel tool to cut out the PCB and a groove into the underlying plastic to bury a wire below the surface of the PCB.  Works fine now.


Images (2)
  • IMG_6928
  • IMG_6934
Original Post

Replies sorted oldest to newest

Add Reply

This forum is sponsored by MTH Electric Trains
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
Link copied to your clipboard.