Pickup roller on PS3

nsp154OGR Forum Member SUPPORTING MEMBER

Just recieved a new K4 with PS3.

have an 054-072 Atlas switch and a couple of 072 switches it won't pass through at slow speed due to close spacing of rollers on engine. Tender had place for roller on rear trucks, adding roller was easy.

Now on PS3, where do I install new power lead.

thanks for help

brad

12/8/139:04 AM

❤️ 0

Original Post

Replies sorted oldest to newest

nsp154OGR Forum Member SUPPORTING MEMBER

Let me modify my question,

after searching the forum I noticed someone already addressed the problem.

which wire from the tether is the power feed? I was hoping to feed it directly to the board via a pin, is that possible on the PS3?

thanks

12/8/1310:15 AM

❤️ 0

nsp154OGR Forum Member SUPPORTING MEMBER

Thanks George,Again!

George suggested I use the feed from the 2-3 rail switch. I was able to use this feed, works perfectly.

simple fix as I joined at the wire nut which was joining the feeds from the engine rollers.

excellent

12/8/133:35 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!