Skip to main content

I recently bought a revision G TIU for next to nothing.  I got it home and tested it out and everything seems to work okay on it.

Now it is time to update the firmware. When I used my remote(s) to check the firmware code, it doesn't give any info ("TIU CODE VERSION =       "). Is it possible that the firmware on the TIU is so old that my remotes (with version 5.00) are unable to detect the TIU version? 

Do I need to install an intermediate version of the TIU firmware before going all the way to 5.00?

Thanks!
H1000

Original Post

Replies sorted oldest to newest

Just update both the remote and the TIU directly to DCS 5.0 using Loader Program 5.0.

After each device is updated, perform a reset of each. For the TIU do a Factory Reset rather than a Feature Reset.


DCS Book CoverThis and a whole lot more is all in “The DCS Companion 3rd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at OGR’s web store!
Last edited by Barry Broskowitz

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×