I was running my Lionel Century Club GG1.  All was fine until I got a derailment.   Now engine will not run.    I tried a reset.   The cab light blinks continually but doesn’t not respond to commands.   I also tried a reset with aux1 and 6 but nothing.   Any help would be appreciated.   

Original Post

1. Make sure the pantographs are on the locomotive. It won't recognize the TMCC signal without them.

2. Unplug your Command Base. Does the locomotive run in conventional?

3. There aren't any cab lights installed in these locomotives, so I'm guessing you're referring to a headlight. Does it flash like other locos flash when trying to find the TMCC signal, or is this something else?

TRW

Add Reply

Likes (0)
Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×