Skip to main content

1 reply

WIRING LIONEL 313 BASCULE BRIDGE

T TRAINMAN1951OGR Forum Member

Hello and Merry Christmas all

I'd like to operate my 313 Lionel postwar bascule bridge using a ZW. I won't be using the insulated rail sections (Christmas layout). I just want to use a #90 controller to activate the bridge.  I understand the controller connects to terminal 2 and 3. Using the B output on the ZW, what terminal does it connect to on the bridge? The diagram also shows a second wire (Ground?) going to another transformer terminal (not a ZW). Is that supposed to go to common and if so what terminal screw does it connect to on the bridge?

Would appreciate any assistance.

Thanks so much and Merry Christmas

Original Post
DanrDanrOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Note that in the diagram “U” is the center rail.  They are using “A”, an accessory power supply, to power the bridge motor.  “B” is being used to power the track.  There is no problem in not using the isolated sections at either end of the bridge.  You will still need to power the center rail on the bridge.  You can do this by connecting at wire from “U” to terminal 4, if you want it to be unpowered in the elevated position.  If you don’t care, connect the “U” wire to terminal 5.

Add Reply

Views: 324
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×