I did it's the powered a engine all the rest of the 10 car set works perfect. It's a engine issue. If I keep resetting the block and clean the wheels it eventually fires up and all the cars light up and it works. Great but the next day it. Starts all over again. I'm thinking of stop adding smoke I think that may be messing it up or it has a short ii don't know. Thanks for the quick response Mart u
David Mcvicker
lowes2win@aol.com
On Thursday, December 11, 2014 O Gauge Railroading On Line Forum wrote:
== To reply by email, write above this line. ==
Hello, Lowes2win:
We're sending you this notification because you are either following the forum, the content, or the author listed below.
NEW REPLY TO TOPIC
SUBJECT: MTH SANTA FE ABA PROTO SOUND 3 PROBlem
REPLY BY: Marty Fitzhenry
IN: Train Forums / Hi-Rail, O27 and Traditional 3-Rail O Gauge
Start by running the powered A alone. If it runs good, try it with the B and then the other A. If the problem comes in at that point, let us know.
If you have the ABA running good, one at a time add the cars. Keep this going until you hit the car causing the problem and let us know.
VIEW THIS REPLY
Unlock Premium Membership
Just $29.95 Per 12 Months
Sincerely,
O Gauge Railroading On Line Forum
https://ogrforum.ogaugerr.com
To adjust your email notifications for this site, please update yournotification settings.
To suspend ALL email notifications from this site, click here.
Powered By Hoop.la
Original Post
