Really nice
@Big Jim posted:
Big Jim, those are very nice for Lemax! More detail due to they are made of poly resin instead of Porcelain. Lighter in weight too! Ya got me thinking about one of them.
Attachments
@WesternPacific2217 posted:Big Jim, those are very nice for Lemax! More detail due to they are made of poly resin instead of Porcelain. Lighter in weight too! Ya got me thinking about one of them.
They are impressive and the poly resin should make for cheaper shipping costs.
Just arrived today and I will be lighting up the town. I would be interested in learning from anyone who has tried this.
Thanks
Jay
Attachments
@Tranquil Hollow RR posted:Just arrived today and I will be lighting up the town. I would be interested in learning from anyone who has tried this.
Thanks
Jay
I'll be interested to see how they look Jay. Keep us posted.
Bob
The biggest problem I ran into was keeping the lines from becoming entangled. otherwise it's pretty much straight ahead. as long as the other end gets enough light from the source
I’m most certainly underwhelmed🙁. The photo looks better than reality. If it looked like the photo I would be happy. With the room lights off it is very faint. With the room lights on it does not look lit. The run is about 42”.
Guttersnipe, what are the lengths that worked for you?
Attachments
In another attempt I mounted the unit directly underneath so now it’s a 10” run with a similar result. I do believe the sound I’m hearing is the money flushing into the septic system. Perhaps some triple distilled spirits will help my contemplation process.
How many times have I been there
I bought the Atlas O Amtrak P-42 Diesel Locomotive #30138043 at Nicholas Smith Trains today.Very sharp engine.
@Tranquil Hollow RR posted:In another attempt I mounted the unit directly underneath so now it’s a 10” run with a similar result. I do believe the sound I’m hearing is the money flushing into the septic system. Perhaps some triple distilled spirits will help my contemplation process.
If you bought the system from Trainz, reach out to their service folks. They will make it right.
Thanks Bob, and after sipping some thinking medication it dawned on me to search YouTube. Sure enough the proprietor had suggestions for just this situation. It is caused by the fiber optic line being curved and not being straight for the light to travel more efficiently. He suggested using a piece of stirring straw until there are enough lines to keep them straight. We’ll see what happens.
I recently aquired four more postwar F3's. The 2383 Santa Fe ABA, 2354 NYC ABA and 2245 Texas Special AB was one purchase, the 2367 Wabash AB was a seperate purchase.
This Texas Special is the 2nd set I have, it had the flying shoe missing, I put a new one on and wired it to the coil coupler.
The Wabash has some battery damage on the frame, dual motors, good runner, it has the correct B-unit for the 2367.
Overall I did the basic maintence to each one and as always, they run as they should.
Attachments
@Big Jim posted:IF (that's F1 spelled backwards) there any Formula One fans out there, here is a very nice find.
I was checking out the diecast car aisle at Walmart a few weeks ago and came across a 1/43 Red Bull RB18 on the shelf. I am not a big "Red Bull" fan, but as I got to looking at these models, I saw that Burago not only had done the Verstappen version, but, the Perez version as well. In that case and with the price under $10 each, I had to pick them up.
Then yesterday, I was in the local Target store and walked through the diecast car aisle. Much to my surprise, there on the shelf I saw the Burago Mercedes-AMG and Ferrari SF21. There were only two of each left on the shelf. Looking closely, to my amazement there were both teammates cars, Hamilton & Russell for Mercedes-AMG and Leclerc & Sainz for Ferrari. Come with me fellows, we're going home!
I had picked some up at Target, a little cheaper than Walmart. I wanted to put them on a tri-level open car carrier but they were a tad too wide.
As nicely done as these are and being $10 each, they were a steal!
@D&H 65 posted:
D&H 65, I've looked for them online with no luck, mostly because I can't find the Lionel product number. My searches on Lionel's archive have not been successful either! Would you happen to have the PN? Thanks! I might be able to find one somewhere out there. LoL otherwise I'll have to wait until Lionel releases it again!
Hah, found it in the Lionel archive while I was posting this! 2014 Catalog Volume 2. I have have the product number now. 6-81214 Maybe I can find one.
The entire 20th Century LTD, the Greenbrier 614 and the Aberdeen Carolina and Western 21" 2 pack.