Skip to main content

Replies sorted oldest to newest

https://pbw0mef.files.wordpres...ssc3bcberwachung.pdf

Screen Shot 2023-09-29 at 11.11.54 AM

J6 – Sets the current trip level. The (default) trip current is 4.8 amperes if no jumpers are installed. If J6-2
is connected to J6-1 and J6-4 to J6-3 is open, then the current trip is 8.0 amperes. If J6-4 is connected to
J6-3 and J6-2 to J6-1 is open, then the current trip is 12.2 amperes. If J6-4 is connected to J6-3 and J6-2 is
connected to J6-1, then the current trip is 15.4 amperes. See Table Pg-3. Note: Higher Amperages are available
upon request.

I read that just as above for J6, connect 1 wire in a loop between terminals 1-2, and a second wire loop, terminals 3-4

Screen Shot 2023-09-29 at 11.12.34 AM

@cnwdon posted:

The instructions intend for both PAIRS of contacts to be jumped-that's how I read it.

Attachments

Images (2)
  • Screen Shot 2023-09-29 at 11.11.54 AM
  • Screen Shot 2023-09-29 at 11.12.34 AM
Last edited by Vernon Barry

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×