LIONEL 36 REMOTE COMMAND SWITCHES

JohnRDOGR Forum Member

I have 12 switches on my platform that has an outer track and an inner track that work properly using either Command Control(IPAD-DCS WIFI-AIU) or the switch controller.

I have created a two (2) crossovers at different locations on the platform. The trains run fine thru each crossover when I manually move the tracks by hand; however when I try to use the Command Control method or hand throwing the switch controller they will not operate. Cannot figure out what the problem is.

All switches are powered using track power. Voltage on the track is at or near 18V at all times.

4/20/1911:02 PM

❤️ 0

Original Post

Replies sorted oldest to newest

John HOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Are you saying that none of the switches at each crossover respond to an electrical command? Are the track jumpers installed?

4/21/197:08 AM

❤️ 0

EricaAnnOGR Forum Member

Are all the switches programed with the correct switch numbers?

4/21/197:55 AM

❤️ 0

JohnRDOGR Forum Member

John H posted:
Are you saying that none of the switches at each crossover respond to an electrical command? Are the track jumpers installed?

John H

Track jumpers are installed. They are also labeled on the ipad. You can hear the clicking sound on the AIU when you select the switch number.

4/21/1912:36 PM

❤️ 0

JohnRDOGR Forum Member

EricaAnn posted:
Are all the switches programed with the correct switch numbers?

EricaAnn..yes the switch numbers are labeled with the correct switch number

4/21/1912:37 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!