MTH conventional and Proto 2 MU'd?

RockyroadOGR Forum Member DIGITAL SUBSCRIBER

I have a MTH RS3 conventional and a MTH RS3 Proto-2 that I want to run back to Back. What is the procedure to doing this...or is it even posible? The conventional unit responds more quickly to start-up and directional change than the Proto-2, resulting in them moving at different times. Some times they start in different directions. Is the easiest solution to convert the conventionl unit into a non-powered unit by removing the motors?

MTH didn't make a non-powered unit in this road name (Rock Island).

WHY CAN"T I ADD A REPLY TO THIS TOPIC. IT WON"T ALLOW ME TO POST A REPLY!!!

10/26/124:12 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Barry BroskowitzOGR Forum Member MEMORIALIZED MEMBER

MTH didn't make a non-powered unit in this road name (Rock Island).

MTH typically does not make non-powerewd units in the Rail King product line.

10/26/124:43 PM

❤️ 0

RJROGR Forum Member

Barry, they did for the RS3 of other roads, like WM.

Rockyroad, only reasonable way to do it is remove the motors from one and make it a dummy. Or get a slave kit and convert the conventional.

10/26/126:13 PM

❤️ 0

AGHRMattOGR Forum Member SUPPORTING MEMBERMEMORIAL SUPPORTER

If I recall correctly, there was s reset sequence for Proto-2 that turned off the cruise control. I never used it, so I don't know what the acceleration/deceleration characteristics of the locomotive would be in conventional operation.

10/26/127:01 PM

❤️ 0

Barry BroskowitzOGR Forum Member MEMORIALIZED MEMBER

Robert,

they did for the RS3 of other roads, like WM.

That's why I said, "typically".

10/26/127:12 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!