Skip to main content

Hi, I have an mth csx ac4400 purchased from Mercer Junction in October.  I have it hooked up to dcs and was running great. Then today, I went to start it up and none of the sounds work on it. Went and picked it up a to find the bottom of it all oily from the smoke. It runs fine forward but will not go in reverse and  does not make any sounds. I press the horn button And the ditch lights go.  Any suggestions or help is appreciated! -david 

Original Post

Replies sorted oldest to newest

Make sure you didn't accidentally press the "sound" key to " no sound" by pressing it again to check status, regarding the sound problem.  You could also try an engine factory reset I think frome the advanced menu, if not, the engine set up menu.  I'd first take the shell off and investigate the fluid spill, making sure the boards are dry.  5 drops is hardly nothing so make sure fluid path is clear and aligned.

Rich

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×