Skip to main content

Folks,

 

I have a very nice Crow River electromagnet that I am about to paint.  I would like your opinions as to colors.  Please vote for 1:

 

Orange (new)

Yellow (new)

Rusty Orange with grime

Dirty Yellow with grime

Grimy Black

 

I would especially like to hear from those of you with real-world steel mill experience.

 

Thanks,

 

George

Original Post

Replies sorted oldest to newest

I don't work at one but -Dirty yellow, or yellow so dirty its really just black with yellow specks. These are the only two colors I remember seeing electromagnets while at the mill, or the scrap yard.

 Cranes, are mostly white. But they often fly away before I can get a close look 

The booms black, or dark mostly, except boom tip section-yellow or red, and a contrasting color on added jib, boom extensions.   

All of the above? Detailed like it had 10 paint jobs, one each year of use. But receives so much in scratches and grime, you can't tell its fresh after a very short time. Kind of what happens at the mills. The smelting mills also have a "fallout" of dust and ash that will give topside surfaces of everything in the surrounding area, a fine coat of black grimy dust each day. What era is the layout based in? Dad said during the 50s-60s you would have up to 3/8 inch of grimy dust to sweep off your car in the morning, about a mile from the mill. So imagine what years used do to this equipment then, and how "clean" it is now.  

Originally Posted by Adriatic:

All of the above? Detailed like it had 10 paint jobs, one each year of use. But receives so much in scratches and grime, you can't tell its fresh after a very short time. Kind of what happens at the mills. The smelting mills also have a "fallout" of dust and ash that will give topside surfaces of everything in the surrounding area, a fine coat of black grimy dust each day. What era is the layout based in? Dad said during the 50s-60s you would have up to 3/8 inch of grimy dust to sweep off your car in the morning, about a mile from the mill. So imagine what years used do to this equipment then, and how "clean" it is now.  

Yep!  The time frame is 1954, although my own experience with them dates to 1972-74.  In the 1950s and 1960s, graphite fallout in the atmosphere is anywhere from red oxide to black in color.  As a child, I recall the Open Hearth smokestacks billowing smoke (red, gray, black and shades in between) into the air.  It's not an urban legend - my grandmother would have to shake particulates off the laundry that hung in the backyard.

 

I think I will be doing rusty orange / brown with a lot of grimy black.  Nothing in Weirton Steel was clean or looked like new.

 

Many thanks for all the input!

 

George

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×