Skip to main content

Well, I have finally completed the initial work on the new train room.  It used to be my office, before I retired in July.  This work has taken me some additional time due to some physical limitations.  I'm not complaining, mind you, it's part of the life cycle.  So, here are the pictures.  The flooring is Race Deck, and I used the optional rubber cushions to reduce noise, and ease the strain on my legs while standing for long periods of time.  The pictures where the flooring looks light a true yellow and brown represent the actual colors.  The pictures where the yellows look more golden are with the room access door closed.  The lighting in the remainder of the basement is done with daylight bulbs, and that light is influencing how the colors come out.

 

The last photo is at the top of the stairs to the basement.

 

 

IM000005

IM000006

IM000009

IM000010

 

IM000008

IM000014

IM000013

Attachments

Images (7)
  • IM000005
  • IM000006
  • IM000009
  • IM000010
  • IM000008
  • IM000014
  • IM000013
Last edited by Bob Severin
Original Post

Replies sorted oldest to newest

Originally Posted by Gregg Laiben:

Looks great Bob.  How well do the cushions work with both noise and ease of standing?

Right now, with the room being empty, it's hard to tell about the noise level.  I am hoping that the extra cushions will help to cut down noise and vibration after the benchwork is complete.  It is nice to stand on, much better than concrete (which it covers).  The rubber cushions were more than a little difficult to install.  I still have sore thumbs and fingers from pressing the little buggers in.  

Originally Posted by trainman713:

Looks good...How do you like the Race Deck?  I have been looking at that for my basement.

 

Jeff Davis

The RaceDeck results in a nice looking, strong floor.  I would recommend it for a basement.  With the shock towers installed, it seems to creak when I walk on it (there are nine shock towers in each 12 x 12 tile).  For this reason, the entire tile does not sit directly on the subsurface.  But, it is comfortable to stand upon.  

My next step will be to split the electric to the plugs, so that I have two separate circuits, one for each side of the room.  After the electrical is complete, the ceiling shelf layout will be installed.  Then the benchwork, and on and on.  Lots of plans in my head.   I think my "buying (collecting)" phase of the hobby is over.  In the midst of all this, I need to finish fixing the tile in the main shower, and re-grout it.  (It's been awhile since I began this project)

 

Good thing I'm retired, and every day has become Saturday.  

Originally Posted by Michael Hokkanen:

I will be working on steaming a third layer of wall paper off my train room today. Then I will paint the ceiling, prime the walls. After that, two coats of sky blue will be added. Finally, the tables will be brought in. After the carpet is installed on the table tops let the trains begin!

Michael:  I am also planning to use carpet (self-stick tiles) on top of my benchwork.  What type of carpet are you going to use?  Bob

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×