Skip to main content

Finally have a minute to post York Finds.  The entire haul represents three generations of wish list items.  Also included is scenery and accessories for the new layout under construction.

EC30307D-1ADF-4214-9BDB-97F11020C92A

the engine splurges totaled 6 engines.  Highlights included Weaver Hiawatha Hudson, MTH Trainmaster demonstrator, and a K-Line k4 with smoke detectors.



65E73AD8-E0BE-4150-A870-8E2BEEE89DB5

Personal score was a Legacy RF&P Berkshire for my growing RF&P collection.

Attachments

Images (2)
  • EC30307D-1ADF-4214-9BDB-97F11020C92A
  • 65E73AD8-E0BE-4150-A870-8E2BEEE89DB5
Videos (1)
trim.4FBB55E4-288E-4AA9-A03B-3EC3EA6C7C84

Just picked up this stash at a local train swap meet. It is sponsored by a HO club but all scales were present. 9E67925E-D4FD-4DA5-B082-971B1D8EC104

Picked up all the above for $75  everything looks good.  I checked the voltage out of the PH-1, which was around 18V, and I had to clean up the battery compartment of the controller.  



1237E8EE-2B7F-4E00-B522-4EC1BB89A1B1

These were lower on my list of things to purchase but on the list!

Attachments

Images (2)
  • 9E67925E-D4FD-4DA5-B082-971B1D8EC104
  • 1237E8EE-2B7F-4E00-B522-4EC1BB89A1B1

UPS delivered this today.  It's the MTH Lionel Christmas set 11-5505-1 new in the box, still sealed!  I have been looking for this for a long time and finally found one. Of all the tinplate sets I have seen on YouTube, this is the set I wanted the most.   Never thought I would find one new in the box.  Here is the link on YouTube for this set.

https://www.youtube.com/watch?v=ZtbV4J5mX6I

Photos below.

..IMG_7965IMG_7968

Attachments

Images (2)
  • IMG_7965
  • IMG_7968

I went to trainfest in Milwaukee this past weekend.  It is the second time that I have been and I had a lot of fun.  It's about a 90 minute car ride from my house and from my first experience, it was more of an HO or N gauge event.  There was more O gauge this time but not a lot more.  I had a very enjoyable time and spent time with @MrMuffin'sTrains.  I bought 2 custom run MTH Milwaukee Road gondola cars from Steve.  I also bought some cool lighting accessories from  https://www.dwarvin.com/  which I am looking forward to installing.  I bought some street lights and signal crossing devices.  

John

Stopped in a local store “just to look around” on our way home after Dr. appointments last week.  Found out the store was having a clearance on older Dept 56 Dickens Village buildings.  We already have several DV buildings but found a couple we liked that we didn’t own.  There was no way I was passing up the Gad’s Hill Place” building for $25.  Also got the “T. Puddlewick Spectacle Shop” (it was $20) because I have needed glasses since the 5th grade.

8EAB1CB6-4D5E-4E50-B1A5-A726874AE067

A few days later I was thinking about a couple other DV buildings we saw on clearance and decided to purchase them too.  Well once in the store we were informed about other series of buildings also on clearance.  Sometimes I get a little carried away but in this case I had set a maximum spending limit that we would have kept to if it wasn’t for the two $15 buildings my wife bought (and she paid for).  Lol. We ended up getting 3 Dickens Village, 4 New England Village, and 2 Alpine Village buildings.  The Alpine Village buildings were the ones my wife bought.

Here are a few pictures of the remaining buildings.  The first picture is the two buildings I specifically went back to buy.  The next two pictures are the other buildings we purchased, setup on the fireplace mantle.  

0B081CC0-BB35-42A2-B069-A82790473BD6

F7461930-53BE-47F3-9E4D-9210F73AB6E61EFE3069-8202-4E42-AE6E-9A629BFBA8B9

And if that’s not enough, each purchase earned us “Santa bucks” that we used to buy these fence sections.

25DDA798-F271-4B5A-81DD-D67518688215

Attachments

Images (5)
  • 8EAB1CB6-4D5E-4E50-B1A5-A726874AE067
  • 0B081CC0-BB35-42A2-B069-A82790473BD6
  • F7461930-53BE-47F3-9E4D-9210F73AB6E6
  • 1EFE3069-8202-4E42-AE6E-9A629BFBA8B9
  • 25DDA798-F271-4B5A-81DD-D67518688215
@GregM posted:

Stopped in a local store “just to look around” on our way home after Dr. appointments last week.  Found out the store was having a clearance on older Dept 56 Dickens Village buildings.  We already have several DV buildings but found a couple we liked that we didn’t own.  There was no way I was passing up the Gad’s Hill Place” building for $25.  Also got the “T. Puddlewick Spectacle Shop” (it was $20) because I have needed glasses since the 5th grade.

8EAB1CB6-4D5E-4E50-B1A5-A726874AE067

A few days later I was thinking about a couple other DV buildings we saw on clearance and decided to purchase them too.  Well once in the store we were informed about other series of buildings also on clearance.  Sometimes I get a little carried away but in this case I had set a maximum spending limit that we would have kept to if it wasn’t for the two $15 buildings my wife bought (and she paid for).  Lol. We ended up getting 3 Dickens Village, 4 New England Village, and 2 Alpine Village buildings.  The Alpine Village buildings were the ones my wife bought.

Here are a few pictures of the remaining buildings.  The first picture is the two buildings I specifically went back to buy.  The next two pictures are the other buildings we purchased, setup on the fireplace mantle.  

0B081CC0-BB35-42A2-B069-A82790473BD6

F7461930-53BE-47F3-9E4D-9210F73AB6E61EFE3069-8202-4E42-AE6E-9A629BFBA8B9

And if that’s not enough, each purchase earned us “Santa bucks” that we used to buy these fence sections.

25DDA798-F271-4B5A-81DD-D67518688215

Greg, if your looking for more Imight have some, I just have to talk to the wife!

Grabbed this 2020 without a tender for $50 after tax and shipping. It was an impulse buy sold 'untested as is' but runs and smokes great after some CRC to the eunit and a little TLC. Needs a rear steps/apron piece.

I'm loving the rock bottom post war prices out there on the more common stuff. Good deals are certainly out there.

20221119_072859

Attachments

Images (1)
  • 20221119_072859
Last edited by PRRick
@p51 posted:

I went to the Electric Train Shop in Burien. It's the last of the classic old school hobby shops in the region.

When I lived in Burien I used to go to the West Seattle Trains and one day they closed down, come to find out the lease was up so they moved it to Burien! The one I am talking about is on 150th main street!

Stopped in at grocery store to pick up creamer and came out with a 1:43 tractor trailer. I have a couple of others - Coca-Cola, 7-Eleven, and Market Basket - enough for a convoy in the background or on a perimeter road when I finally get around to putting a layout up. $15. Kind of fun.



IMG_4798 Large

Attachments

Images (1)
  • IMG_4798 Large: Shop Rite Tractor Trailer
@th55 posted:

UPS delivered this today.  It's the MTH Lionel Christmas set 11-5505-1 new in the box, still sealed!  I have been looking for this for a long time and finally found one. Of all the tinplate sets I have seen on YouTube, this is the set I wanted the most.   Never thought I would find one new in the box.  Here is the link on YouTube for this set.

https://www.youtube.com/watch?v=ZtbV4J5mX6I

Photos below.

..IMG_7965IMG_7968

Watched the video TH .   What a beautiful train.  Great find.

@mike g. posted:

When I lived in Burien I used to go to the West Seattle Trains and one day they closed down, come to find out the lease was up so they moved it to Burien! The one I am talking about is on 150th main street!

I love that store!  The owner is awesome!  I bought my legacy 990 system from him a few years ago.

@Mooner posted:

Stopped in at grocery store to pick up creamer and came out with a 1:43 tractor trailer. I have a couple of others - Coca-Cola, 7-Eleven, and Market Basket - enough for a convoy in the background or on a perimeter road when I finally get around to putting a layout up. $15. Kind of fun.



IMG_4798 Large

Brings back memories of my Philly days.  Still have my old ShopRite courtesy cars knocking about somewheres... 

Mitch

Found some cars and caboose for my t1 chessie steam special. In  my train world it ran freight. LolPXL_20221116_232615007

Beautiful engine, Donnie. I actually had one on my roster back in the day, but my ex swiped it in the divorce but I still have the caboose that was issued with it. Looks great pulling just about anything (but part of me agrees with Joe - passenger cars would make for a sharp consist!!!).

Last edited by Apples55

Picked up two pieces of rolling stock at the Greenberg's Train Show in Wilmington, MA this past weekend.

The first is an MTH Railking SF ATSF lighted steel caboose with LED warning lights, detailed interior and brakeman.

The second is a Lionel "uncatalogued" welding car in B&M livery. The welder figure at the end of the car rotates from right to left as the car moves and the welding torch flickers from a blue LED light. The side of the tool box reads, " Portsmouth Naval Shipyard est. 1800". Very cool.

SF CABOOSE 1SF CABOOSE 2SF CABOOSE 3BM WELD 1BM WELD 2BM WELD 3

Attachments

Images (6)
  • SF CABOOSE 1
  • SF CABOOSE 2
  • SF CABOOSE 3
  • BM WELD 1
  • BM WELD 2
  • BM WELD 3

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×