I was running trains on layout today i normally keep my engines at 25% sound while running an single engine.I did a lashup,consist and set engines at 25% and ran trains fine. Sound fine .Saved the setting by pressing correct soft key on remote.Shut things off to go lunch.When i came back and started trains back up lead engine was at 25% and trailing engine went up to 70%.is there something i did wrong for this to happen? And it was both engine volume and accent volume.
Replies sorted oldest to newest
using the app or the remote?
Was the change saved using the FSV on the remote, I would guess right?
There was a discussion on another post about the sounds reverting back with DCS 6.x (newer versions)
I find that there are different years of these engines where the sound volumes are all over the charts. I have a PS3 CSX
https://mthtrains.com/20-20192-1
that's volume is much lower than my newer ones. When I turn down the volume of a consist, I don't even hear this one.
Yes was using remote PS 3 engines and pressing FSV. All heritage engines was Norfolk Southern and Conrail
Access to this requires an OGR Forum Supporting Membership
