E-Stop does not work in DCS Wi-Fi App

There's a bug that I found some time ago that has been reported to MTH. On my layout, with 3 TIUs in Super TIU mode, it goes like this:

There’s a defect that can inhibit E-Stop activation that is present in both iOS and Android versions, however, it varies in severity between the two versions.

Using either the iOS or Android versions of the app, E-Stop will not work at all on the Engine Control Screen unless there is an active engine in the Engine Control Screen. If there is no engine listed or if the shown engine is Inactive, E-Stop doesn’t do anything.

If there is an active engine listed on the Android version’s Engine Control Screen and E-Stop is pressed, all TIUs are shut down properly.

If there is an active engine listed on the iOS version’s Engine Control Screen and E-Stop is pressed, only the TIU of the active engine is shut down. Following the E-Stop activation, if a different engine on a different TIU is made active, E-Stop may then be used to shut down that TIU. This process may be used to shut down all of a layout’s TIUs, albeit one at a time.

As of release 3.1.0, E-Stop on the Track Screen mimics the way E-Stop works on the Engine Control Screen.

Thanks, Barry.  We were hoping to hear from you.  We will give it a try tomorrow and report back.

Happy holidays!

Barry, that was the problem.  With an active engine, it works.